Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the plastic casing that holds the trunk liner in place, directly behind the tail light.
-
Unscrew the plastic casings.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the three plastic wing nuts located behind the tail lights.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully pull the tail light away from the car to expose the connected wires.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unclip the rear panel of the tail light assembly. There are two clips on the top and two on the bottom.
-
Remove the rear panel from the rest of the assembly.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Grab the plastic base of the bulb and gently wiggle it free.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
After putting the new bulbs in, turn the desired lights on to check that the newly installed bulbs work correctly.
-
Cancelar: No complete esta guía.
4 personas más completaron esta guía.