Repara tus cosas Comunidad Tienda

1997-2006 Jeep Wrangler (TJ) Headlight Replacement

Introducción

With enough time, any lightbulb will burn out, and headlights are no different.

This guide demonstrates how to change a headlight in a 1997-2006 Jeep Wrangler. As opposed to many vehicles, the entire headlight assembly for this model must be replaced, not just the bulb. This guide will aid in disassembly and reassembly of the external and internal headlight bracket.

This is a straight forward process, requiring basic tools and less than an hour of your time.

Ensure that your vehicle is turned off and the emergency brake is engaged before beginning the repair.

Qué necesitas

  1. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement, Headlight: paso 1, imagen 1 de 1

    • Unclasp and prop up the hood.

    Editar

  2. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: paso 2, imagen 1 de 1

    • Remove the three 15.9 mm screws around the external ring casing with a Phillips #0 screwdriver.

    Editar

  3. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: paso 3, imagen 1 de 1

    • Pull out the external ring casing.

    Editar

  4. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: paso 4, imagen 1 de 2 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: paso 4, imagen 2 de 2

    • Remove the four screws securing the internal ring casing with a T15 Torx screwdriver.

    Editar

  6. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: paso 5, imagen 1 de 1

    • Disconnect the headlight assembly from the vehicle by pulling the connector directly out of the back port.

    Editar

  7. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: paso 6, imagen 1 de 1

    • Realign the internal bracket to match the screw holes.

    Editar

  8. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: paso 7, imagen 1 de 1

    • Reinstall the four screws securing the internal ring casing with a T15 Torx screwdriver.

    Editar

  9. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: paso 8, imagen 1 de 1

    • Realign the external bracket to match the screw holes.

    Editar

  10. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: paso 9, imagen 1 de 1

    • Replace the three 15.9 mm screws using a Phillips #0 screwdriver.

    Editar

  11. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: paso 10, imagen 1 de 1

    • Close and clasp the hood back to its original position.

    Editar
Conclusión

Enjoy your bright new headlight(s)!

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 29

Ultimos 30 días: 105

Todo El Tiempo: 3,292