Introducción

When a car is driven, tires tend to wear unevenly. To extend the life of tires, it is important to rotate the tires every 30,000 miles. This guide will show you how to remove and rotate tires.

Herramientas

Partes

No se requieren partes.

Turn car off and remove keys from ignition.
  • Turn car off and remove keys from ignition.

  • Place car in park (automatic) or neutral (manual).

  • Engage parking brake.

Agregar Comentario

Use hydraulic jack on frame of car to raise car.
  • Use hydraulic jack on frame of car to raise car.

  • Place jack head underneath frame of car.

  • Only necessary to jack the car until the wheels are just off the ground.

Agregar Comentario

  • Place jack stand on frame of car and remove jack.

  • Do no work under car supported only by hydraulic jack, serious injury or death may occur.

Agregar Comentario

  • Turn car off and remove keys from ignition.

  • Place car in park (automatic) or neutral (manual).

  • Engage parking brake.

Agregar Comentario

  • Use hydraulic jack on frame of car to raise car.

  • Place jack head underneath frame couple (pictured).

  • Only necessary to jack the car until the wheels are just off the ground.

Agregar Comentario

  • Place jack stand on frame of car and remove jack.

  • Do not work under car supported only by hydraulic jack, serious injury or death may result.

Agregar Comentario

  • Pry off the all four hub caps by placing a small flathead screwdriver between hubcap and rim pulling the screwdriver away from tire.

  • Pull hubcaps away from tires.

Agregar Comentario

  • Loosen each of the five lug nuts on all tires by turning them counter-clockwise with a 19mm wrench.

Agregar Comentario

  • Remove tires by pulling directly away from car exposing brake rotors.

Agregar Comentario

  • Swap tires according to diagram.

Agregar Comentario

  • Place tires on axels.

  • Hand tighten the lug nuts with narrow end of nut towards car.

  • Finish tightening the lug nuts with 19mm Torque Wrench to a torque of 63 lb*ft.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 3-28, Regan Fall 2010 Miembro de Cal Poly, Team 3-28, Regan Fall 2010

CPSU-REGAN-F10S3G28

4 Miembros

9 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 2,315