Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Firstly Disconnect battery
-
Always take the negative terminal off first.
-
'''General Tip After disconnecting the battery leave the car for about 10 mins , This lets any residual energy left in the electrical system to dissapate. It is good practise whatever the job
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn car off and remove keys from ignition.
-
Place car in park (automatic) or neutral (manual).
-
Engage parking brake.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use hydraulic jack on frame of car to raise car.
-
Place jack head underneath frame couple (pictured).
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pry off the front hub caps by placing a small flathead screwdriver between hubcap and rim and pulling the screwdriver and hubcap away from tire.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Loosen each of the five lug nuts on the rear left and rear right tires by turning them counter-clockwise with a 19mm socket wrench.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove tires by pulling directly away from car exposing rear brake disks and calipers.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove upper and lower guide bolts on rear left and rear right brake calipers with 17mm crescent wrench.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the two rear brake pad retaining pins on each caliper.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove brake pad retaining pins by punching them out with a 3mm allen key.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove both rear brake pads by pulling them out of calipers.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Verify that pins are inserted through caliper and brake pad holes and seated over the metal pin guides.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Tap pins through both rear brake pads and caliper using a wrench.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.