Saltar al contenido principal

1967-68 Mustang Kick Panel Speaker Replacement

Qué necesitas

  1. 1967-68 Mustang Kick Panel Speaker Replacement, Kick Panel Speaker: paso 1, imagen 1 de 2 1967-68 Mustang Kick Panel Speaker Replacement, Kick Panel Speaker: paso 1, imagen 2 de 2
    • Find the car battery under the hood.

    • On the battery locate the black negative battery terminal.

    • Next unscrew the knob on the disconnect.

    • Lastly move the negative lead away from the batter terminal.

    • Make sure not to cross the battery leads.

  2. 1967-68 Mustang Kick Panel Speaker Replacement: paso 2, imagen 1 de 1
    • Locate the kick panel speaker that needs to be replaced.

  3. 1967-68 Mustang Kick Panel Speaker Replacement: paso 3, imagen 1 de 1
    • Locate the two top screws as well as the two bottom screws for the speaker.

    • Check the kind of screws that were used to hold the speaker in place.

  4. 1967-68 Mustang Kick Panel Speaker Replacement: paso 4, imagen 1 de 3 1967-68 Mustang Kick Panel Speaker Replacement: paso 4, imagen 2 de 3 1967-68 Mustang Kick Panel Speaker Replacement: paso 4, imagen 3 de 3
    • You are now ready to start replacing the speaker.

    • A philips head screwdriver will be needed.

    • Do not use a socket in this situation because it may mess up the speaker guard.

    • Lastly make sure to remove the screw completely without stripping out the screw hole.

  5. 1967-68 Mustang Kick Panel Speaker Replacement: paso 5, imagen 1 de 3 1967-68 Mustang Kick Panel Speaker Replacement: paso 5, imagen 2 de 3 1967-68 Mustang Kick Panel Speaker Replacement: paso 5, imagen 3 de 3
    • The speaker guard and speaker are now ready to be removed.

    • Be careful when removing the speaker. Do not pull the wires tight.

  6. 1967-68 Mustang Kick Panel Speaker Replacement: paso 6, imagen 1 de 2 1967-68 Mustang Kick Panel Speaker Replacement: paso 6, imagen 2 de 2
    • Locate the wires on the back of the broken speaker.

    • Remove both the positive and negative wires.

  7. 1967-68 Mustang Kick Panel Speaker Replacement: paso 7, imagen 1 de 2 1967-68 Mustang Kick Panel Speaker Replacement: paso 7, imagen 2 de 2
    • Now locate the new speaker.

    • Slide the positive and negative wires onto the speaker terminals.

  8. 1967-68 Mustang Kick Panel Speaker Replacement: paso 8, imagen 1 de 3 1967-68 Mustang Kick Panel Speaker Replacement: paso 8, imagen 2 de 3 1967-68 Mustang Kick Panel Speaker Replacement: paso 8, imagen 3 de 3
    • Place the speaker back into the kick panel housing.

    • Line up the speaker holes with the existing holes in the kick panel.

    • Be careful not to pinch the speaker wires.

    • This would be a good time to replace the speaker wires if needed

  9. 1967-68 Mustang Kick Panel Speaker Replacement: paso 9, imagen 1 de 2 1967-68 Mustang Kick Panel Speaker Replacement: paso 9, imagen 2 de 2
    • Place the speaker guard back over the speaker.

    • Screw in all four screws

    • Do not over tighten the screws or the holes will strip out.

  10. 1967-68 Mustang Kick Panel Speaker Replacement: paso 10, imagen 1 de 2 1967-68 Mustang Kick Panel Speaker Replacement: paso 10, imagen 2 de 2
    • Reconnect the negative battery terminal.

    • Screw the knob until it is snug.

Conclusión

You have now replaced the speaker.

Una persona más ha completado esta guía.

John

Miembro Desde 09/29/15

101 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 15-7, Green Fall 2015 Miembro de Cal Poly, Team 15-7, Green Fall 2015

CPSU-GREEN-F15S15G7

3 Miembros

7 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 15

Todo El Tiempo: 1,648