Saltar al contenido principal

1922 GE AOU Fan Power cord Replacement

Qué necesitas

  1. 1922 GE AOU Fan Power cord Replacement, Power cord: paso 1, imagen 1 de 2 1922 GE AOU Fan Power cord Replacement, Power cord: paso 1, imagen 2 de 2
    • Tip the fan to its side and remove the three size 8 screws using a 9/32 flat-head screwdriver.

    • The screws may be brittle from age, so be careful.

    • Take the bottom plate off the fan and set it aside.

  2. 1922 GE AOU Fan Power cord Replacement: paso 2, imagen 1 de 1
    • Remove the three number 8 screws that hold the switch in place.

  3. 1922 GE AOU Fan Power cord Replacement: paso 3, imagen 1 de 1
    • Remove the switch, carefully sliding the speed lever out of its slot.

    • Don't remove the switch too quickly or you can damage the head-wire.

  4. 1922 GE AOU Fan Power cord Replacement: paso 4, imagen 1 de 1
    • Once the switch is free, unscrew the two knurled nuts holding the wires in place.

  5. 1922 GE AOU Fan Power cord Replacement: paso 5, imagen 1 de 1
    • Turn the switch over and unscrew the nut securing the wire with the 5/16 crescent wrench.

  6. 1922 GE AOU Fan Power cord Replacement: paso 6, imagen 1 de 1
    • Remove the switch and set it aside, then pull the wire through the grommet.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Elias Dorna

Miembro Desde 06/08/16

125 Reputación

1 Guía escrita

Equipo

Texas Tech, Team 3-5, Rauch SU 2016 Miembro de Texas Tech, Team 3-5, Rauch SU 2016

TTU-RAUCH-SU16S3G5

2 Miembros

1 Guía escrita

Un comentario

Westinghouse table fan needs new cord (just bought). 18 gauge cord? Where to buy?

carol w - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 6

Todo El Tiempo: 2,737