Saltar al contenido principal

電球型蛍光灯の交換

  1. 電球型蛍光灯の交換, 電球型蛍光灯: paso 1, imagen 1 de 2 電球型蛍光灯の交換, 電球型蛍光灯: paso 1, imagen 2 de 2
    • 故障した電球をソケットから取り外します。電球を軽く掴んで反時計回しすると取れます。

    • 電球が熱くなっていることがあります。手袋を使うか、電球が冷えるのを待ってください。

  2. 電球型蛍光灯の交換: paso 2, imagen 1 de 1
    • 電気屋などから新しい電球型蛍光灯を入手します。

    • 新しい電球型蛍光灯を時計回りに回してソケットに取り付けます。

    • この手順の前にソケットの電源がオフになっていることを確認してください。そうしないと怪我をすることがあります。

  3. 電球型蛍光灯の交換: paso 3, imagen 1 de 1
    • ライトのスイッチやノブでソケットの電源をオンにします。

    • おめでとうございます!電球の交換に成功しました!お好みの冷たい飲み物であなたの努力に乾杯してください。

Linea de Meta

12 personas más completaron esta guía.

Un agradecimiento especial a estos traductores:

en jp

100%

¡ Takehiro nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

WiseGeek

Miembro Desde 04/04/11

1,364 Reputación

2 Guías creadas

Un comentario

You shouldn't unscrew/screw CFL Bulb from its tube because there is a very small risk that it will break (Especially if it has the tubular shape (2U, 3U and 4U)). Try to unscrew/screwing it from its plastic base.

Jokid - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 13

Todo El Tiempo: 7,879