T° HOLD OPERATORS MANUAL
T° HOLD OPERATORS MANUAL ®
Medical Solutions, Inc.
3901 Centerview Drive, Suite L, Chantilly, VA 20151 (800) 435-7600 Phone · (703) 834-0039 Fax · www.warmiv.com
T A B L E O F C O N T E N T S
| 1.0 | Intended Use .......................................................................................................... 3 |
|---|---|
| 2.0 | Product Description .............................................................................................. 3 |
| 3.0 | Specifications and Operating Information .......................................................... 6 |
| 3.1 Specifications .................................................................................................... | |
| 6 3.2 Storage and Operating Conditions .................................................................... 6 | |
| 4.0 | 3.3 Electrical Requirements .................................................................................... 6 |
| Operating Instructions .......................................................................................... 7 | |
| 5.0 | Cleaning Instructions ............................................................................................ 8 |
| 6.0 | Troubleshooting .................................................................................................... 8 |
| 7.0 | Preventive Maintenance Plan ............................................................................... 9 |
| 8.0 | Electrical Schematic ............................................................................................ 10 |
| A.1 Warranty RegistrationCard…………………………………………….. | 12 |
| Appendix B: | ProductLabelsList……………………………………………………...13 |
Table Caption: This table of contents outlines the various sections of a product manual, covering intended use, product description, specifications, operating and cleaning instructions, troubleshooting, maintenance, and technical diagrams. It also includes information on warranty registration and a list of product labels.
1 6056 Rev B
TABLE OF FIGURES
| Figure 1 - General Set-up...............................................................................................3 |
|---|
| Figure 2 - Product Labels (Heater Plate)......................................................................4 |
| Figure2A(Front)……………………………………………………………….4 |
| Figure2B(Back)……………………………………………………………….4 |
| Figure 2C (Side Bottom & Upper Left) ……………………………………….4 |
| Figure 3 - Product Labels (Power Box).........................................................................5 |
| Figure 3A (Front).............................................................................................................5 |
| Figure 3B (Back)..............................................................................................................5 |
| Figure 4 - I.V. Mounting Pole .......................................................................................7 |
| Figure 5 - Hook Swivel and Bag Mounting ..................................................................7 |
| Figure 5A (Lower Hook)................................................................................................7 |
| Figure 5B (Upper Hook) ...............................................................................................7 |
| Figure 6 - Power Indicator Light and LED Indicators.................................................8 |
| Figure 6A (Power Switch) .............................................................................................8 |
| Figure 6B (LED Lights) ................................................................................................8 |
Table Caption: This table of contents lists figures that illustrate the general setup, product labels for a heater plate and power box, components like the I.V. mounting pole and hooks, and indicator lights. It provides page numbers for each figure and sub-figure.
2 6056 Rev B
T° HOLD ® Operators Manual
Congratulations on your selection of the Medical Solutions, Inc. (MSI) T° HOLD ® 1000LS. You have selected one of the components of our state-of-the-art Fluid Warming System, designed to maintain normothormic fluids for your patients. The use of the T° HOLD ® , like all of the components of our proprietary System, helps reduce complications due to inadvertent hypothermia and increases patient safety and comfort. The MSI Fluid Warming System helps keep the patient warm from admission to discharge. We hope that both you and your patients enjoy the benefits of this exclusive technology.
Please read the entire Operators Manual before using the T°HOLD ® 1000LS.
1.0 INTENDED USE
The T° HOLD ® is designed to hold, warm, and maintain 1000mL I.V. fluid bags at a temperature of 40°C (104°F).
2.0 PRODUCT DESCRIPTION
The T° HOLD ® consists of two components: the Power Box and the Heater Plate. The Power Box can be mounted on an I.V. pole or bed rail or attached to a wall. The Heater Plate is designed to hang on an I.V. pole.
The I.V. fluid bag is hung from either hook at the top of the Heater Plate and the elastic strap holds the I.V. fluid bag in place. Two LED Indicators on the bottom of the Heater Plate illuminate when the Heater Plate is warming.
NOTE: Please review the I.V. fluid bag manufacturer's recommendations on the appropriate time and temperature for the fluid being warmed
3 6056 Rev B
2.1 Important Labels and Directions
The following labels are found on the T° HOLD ® .
- o Model/ Serial Number.
- o Do Not Open.
- o Electrical Shock Symbol.
- o United States Patents.
- o Made in the USA.
- o Warning: Risk of Fire. Replace Fuse as Marked: 250V 2.0 AMP.
- o Caution: Electrical shock hazard. Do not remove protective panel. Refer servicing to qualified personnel.
- o Caution: Verify
Regístrate gratis en iFixit para leer el documento completo (15 páginas)
Necesitamos que te hagas una cuenta gratuita para ayudar a bloquear los bots y que iFixit siga siendo un sitio para personas.
