Thermacare ® REF TC3003
Convective Warming System
Konvektionsvarmesystem Konvektionsvärmesystem Virtauslämmitinjärjestelmä
Sistema de Aquecimento por Convector
Système de réchauffement par convection Aparato de calentamiento convectivo Sistema di riscaldamento per convezione Konvektionswärmesystem Convectie Verwarmingssysteem
Σύστημα κυκλοφορίας θερμότητας
Operating Manual
Betjeningsvejledning Använderanvisning Käyttöopas Manual de Utilização Manuel d'utilisation Manual del usuario Guida all'uso Bedienungshandbuch Bedieningshandleiding Εγχειρίδιο Λειτουργίας
Before you begin . . .
Important
The Thermacare TC3003 Convective Warming Unit is compatible with model TC1050, TC1050N, TC2050, TC2050N, TC2052, TC2052N, TC2054, TC2054N, TC2060 and TC2061 Warming Quilts.
The Thermacare Convective Warming System (figure 1, page 4) provides a continuous means of warming patients to help prevent and/or treat hypothermia. The system consists of a Convective Warming Unit (Power Unit) and a disposable Quilt. A connecting hose conducts heated air from the Power Unit to the Quilt.
Read and understand the Operator's Manual and all precautions prior to using the TC3003 Convective Warming System.
We suggest that a biomedical engineer perform the FUNCTIONAL CHECK AND SAFETY INSPECTION regularly to assure the TC3003 Power Unit works properly (refer to TC003 Service Manual) .
Review the SAFETY PRECAUTIONS in section 1.0 (pp. 2-3) prior to each application.
Receiving Inspection
Upon receipt, unpack the Power Unit. Save all packing material. Perform a visual and mechanical inspection for concealed damage. If any damage is found, notify the carrier at once and ask for a written inspection. Photograph any damage and prepare a written record. Failure to do so within 15 days may result in loss of claim.
Contact your local dealer for assistance.
NOTE: Extremely high storage temperatures (such as those found in rail cars or automobile trunks on hot summer days) can cause the overtemp thermostats within this device to actuate. Should this occur, the REMOVE FROM USE indicator will light when the Power Unit is turned on. If this happens, the thermostats must be manually reset by qualified personnel such as certified biomedical electronics technicians or certified clinical engineers according to the TC3003 Service Manual instructions.
Symbols used within this manual:
Attention: consult accompanying documents
Dangerous voltage
Protective earth (ground)
Type BF applied equipment
Off-on switch
Fan only (no heat)
32°C
38°C
43°C
46°C
REMOVE FROM USE (indicator light, amber color)
Do not use in operating room (OR) or Intensive Care Unit (ICU)
Ambient operating temperature
Table of Contents
Table of Contents
Table Caption: This table outlines the sections and corresponding page numbers of a document, and also lists the illustrations and tables with their respective descriptions and locations.
