Saltar al contenido principal

Este desmontaje no es una guía de reparación. Para reparar tu Xbox One Wireless Controller Model 1537, utiliza nuestros manuales de servicio .

  1. Start off with having an Xbox One Controller (:
    • Start off with having an Xbox One Controller (:

  2. Start with removing the battery pack and exposing the T8 security screw. The screw should be hidden behind a warranty sticker. Start with removing the battery pack and exposing the T8 security screw. The screw should be hidden behind a warranty sticker.
    • Start with removing the battery pack and exposing the T8 security screw. The screw should be hidden behind a warranty sticker.

  3. Remove the side panels exposing the second T8 security screw using a spudger, an IFixit Opening Tool, or your nails, each choice is fun. Remove the side panels exposing the second T8 security screw using a spudger, an IFixit Opening Tool, or your nails, each choice is fun. Remove the side panels exposing the second T8 security screw using a spudger, an IFixit Opening Tool, or your nails, each choice is fun.
    • Remove the side panels exposing the second T8 security screw using a spudger, an IFixit Opening Tool, or your nails, each choice is fun.

  4. Kits de reparación de iPhone X

    ¿Garantía vencida? No te preocupes, tenemos la solución.

    Comprar Ahora

    Kits de reparación de iPhone X

    ¿Garantía vencida? No te preocupes, tenemos la solución.

    Comprar Ahora
  5. By removing all side panels all 5 T8 security screws have appeared!
    • By removing all side panels all 5 T8 security screws have appeared!

  6. Once you removed the T8 security screws remove the front face plate. Once you removed the T8 security screws remove the front face plate. Once you removed the T8 security screws remove the front face plate.
    • Once you removed the T8 security screws remove the front face plate.

  7. Remove the T6 screws  to remove the PCB's. It takes a pull to seperate the connectors. Watch the wires! You can not fully remove the circuit board without removing the wires and it requires soldering.
    • Remove the T6 screws to remove the PCB's.

    • It takes a pull to seperate the connectors.

    • Watch the wires! You can not fully remove the circuit board without removing the wires and it requires soldering.

  8. Remove the top cover, it folds over. There are 5 T6 and one 1,5mm allen to remove. There are 5 T6 and one 1,5mm allen to remove.
    • Remove the top cover, it folds over.

    • There are 5 T6 and one 1,5mm allen to remove.

  9. Remove the circuit board Under the rubber is the A B X Y buttons. Under the rubber is the A B X Y buttons.
    • Remove the circuit board

    • Under the rubber is the A B X Y buttons.

  10. Follow the instructions in reverse to get everything together again. :D Follow the instructions in reverse to get everything together again. :D Follow the instructions in reverse to get everything together again. :D
    • Follow the instructions in reverse to get everything together again. :D

ubaldo gutierrez

Miembro Desde 07/11/16

244 Reputación

1 Guía escrita

Very good instructions...

Chadwick Posey - Contestar

Nice instructions. I need to take apart mine and replace the d-pad. The previous owner was a bit... rough. Sometimes it doesn't work or it clicks twice. Cheers!

Johnathan - Contestar

Do you think that you can label the internals of the controller.

David Becerra - Contestar

I have a custom controller from the xbox design labs. I want to change the led on the front.

Can someone point out the model/ size led I would need?

Alajandro - Contestar

How do you put the sync buttom back in? Which way does it face?

Throaty Sea5 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 7

Últimos 7 Días: 380

Últimos 30 Días: 2,418

Todo El Tiempo: 79,043