Herramientas Destacadas en este Teardown

Este desmontaje no es una guía de reparación. Para reparar tu Wahl Cordless Beard Trimmer, utiliza nuestros manuales de servicio .

  1. Begin by removing the battery cover from the back of the trimmer. Begin by removing the battery cover from the back of the trimmer.
    • Begin by removing the battery cover from the back of the trimmer.

  2. Remove the battery. Remove the battery.
    • Remove the battery.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Remove the screws, then gently lift off the blade. A small piece of plastic should come off with the blade. There will be a spring revealed from under the blade, remove this as well. Remove the screws, then gently lift off the blade. A small piece of plastic should come off with the blade. There will be a spring revealed from under the blade, remove this as well. Remove the screws, then gently lift off the blade. A small piece of plastic should come off with the blade. There will be a spring revealed from under the blade, remove this as well.
    • Remove the screws, then gently lift off the blade. A small piece of plastic should come off with the blade. There will be a spring revealed from under the blade, remove this as well.

  5. Remove the screws from the sides of the battery compartment. Then, gently separate the two halves of the plastic cover. Remove the screws from the sides of the battery compartment. Then, gently separate the two halves of the plastic cover.
    • Remove the screws from the sides of the battery compartment. Then, gently separate the two halves of the plastic cover.

  6. Lay both halves of the trimmer out, and remove the switch from the inside of the white plastic cover. Lay both halves of the trimmer out, and remove the switch from the inside of the white plastic cover.
    • Lay both halves of the trimmer out, and remove the switch from the inside of the white plastic cover.

  7. Finally, remove the motor from the black plastic cover. If desired, this motor can be de-soldered from the red wire and re-purposed. Finally, remove the motor from the black plastic cover. If desired, this motor can be de-soldered from the red wire and re-purposed.
    • Finally, remove the motor from the black plastic cover. If desired, this motor can be de-soldered from the red wire and re-purposed.

arielletc28

Miembro Desde 28/11/18

143 Reputación

1 Guía escrita

Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 7

Últimos 30 Días: 42

Todo El Tiempo: 208