Saltar al contenido principal

Qué necesitas

Este desmontaje no es una guía de reparación. Para reparar tu Fan, utiliza nuestros manuales de servicio .

  1. Vornado Zippi Fan Teardown, Removing Stand: paso 1, imagen 1 de 3 Vornado Zippi Fan Teardown, Removing Stand: paso 1, imagen 2 de 3 Vornado Zippi Fan Teardown, Removing Stand: paso 1, imagen 3 de 3
    • Pull the stand out of the enclosure on each side

  2. Vornado Zippi Fan Teardown, Remove Blades and Speed Control: paso 2, imagen 1 de 3 Vornado Zippi Fan Teardown, Remove Blades and Speed Control: paso 2, imagen 2 de 3 Vornado Zippi Fan Teardown, Remove Blades and Speed Control: paso 2, imagen 3 de 3
    • Remove the blades by pulling away from the enclosure

    • Remove the speed control by pulling away from the enclosure

  3. Vornado Zippi Fan Teardown, Remove Guard Screws: paso 3, imagen 1 de 2 Vornado Zippi Fan Teardown, Remove Guard Screws: paso 3, imagen 2 de 2
    • Remove the 4 screws coupling the orange plastic enclosure and black plastic guard

  4. Vornado Zippi Fan Teardown, Remove Enclosure Screws: paso 4, imagen 1 de 3 Vornado Zippi Fan Teardown, Remove Enclosure Screws: paso 4, imagen 2 de 3 Vornado Zippi Fan Teardown, Remove Enclosure Screws: paso 4, imagen 3 de 3
    • Remove the screw coupling the top half of the enclosure

    • Remove the screw coupling the bottom of the enclosure, near the power cable

    • Remove the screw beneath the rubber inserts holding the stand

  5. Vornado Zippi Fan Teardown, Remove Enclosure and Guard: paso 5, imagen 1 de 3 Vornado Zippi Fan Teardown, Remove Enclosure and Guard: paso 5, imagen 2 de 3 Vornado Zippi Fan Teardown, Remove Enclosure and Guard: paso 5, imagen 3 de 3
    • Separate the two halves of the enclosure, leaving the power cable, switch, motor and guard

    • Remove the 2 screws attaching the guard to the motor

  6. Vornado Zippi Fan Teardown, Remove Switch: paso 6, imagen 1 de 2 Vornado Zippi Fan Teardown, Remove Switch: paso 6, imagen 2 de 2
    • Remove the 2 screws holding the switch in the mount connected to the motor

  7. Vornado Zippi Fan Teardown, Remove Switch Mount: paso 7, imagen 1 de 2 Vornado Zippi Fan Teardown, Remove Switch Mount: paso 7, imagen 2 de 2
    • Remove the two screws securing the switch mount to the motor

Nathan Lentz

Miembro Desde 11/19/15

20 Reputación

1 Guía escrita

2 comentarios

Mine was making noise and difficult to get the nose cone pulled off. I used two coins in the crack on opposing sides and twisted them.

S Lewis - Contestar

it won't keep it`s position ,folds and flaps out ,if i could tighten the arm

andre b - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 1,176