Saltar al contenido principal

Este teardown está en en curso – Recarga periódicamente para ver los cambios más recientes!

Introducción

This guide will show how to take the back housing off the Tablet portion and the keyboard cover.

  1. After this procedure there seemed to be more back light bleed on my tablet.  Not sure if it was there before so be careful. Remove the tablet from the dock.
    • After this procedure there seemed to be more back light bleed on my tablet. Not sure if it was there before so be careful.

    • Remove the tablet from the dock.

    • Find the best place to insert your plastic pry tool (I used the Micro-SD slot). Carefully go around the perimeter of the tablet and unclip the back cover.

    • Take note off all the clips. The back cover is held in place with a ton of these all around.

  2. Once you have the back cover off you are free to replace what you'd like. Msata SSD Part #MZMTE128HMGR-0000 M.2 2230 WiFi Model #7260NGW
    • Once you have the back cover off you are free to replace what you'd like.

    • Msata SSD Part #MZMTE128HMGR-0000

    • M.2 2230 WiFi Model #7260NGW

  3. Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora

    Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora
  4. Battery Model #PA5190U-1BRS Motherboard Part #DAOZC1MBADO REV:D Capacitive button/dock board Part #3TCZ1T80000
    • Battery Model #PA5190U-1BRS

    • Motherboard Part #DAOZC1MBADO REV:D

    • Capacitive button/dock board Part #3TCZ1T80000

    • Re-assembly in reverse order.

  5. With the keyboard separated remove all the screws in the bottom. The top 4 screws are longer then the bottom 6. Keyboard back cover Part #ZYE35CZ1BA0100140810-01 REV:3A Keyboard boards and weights.
    • With the keyboard separated remove all the screws in the bottom. The top 4 screws are longer then the bottom 6.

    • Keyboard back cover Part #ZYE35CZ1BA0100140810-01 REV:3A

    • Keyboard boards and weights.

  6. The keyboard dock board.  Looks like there is a way to add a second HDD/SSD here but the connector is not soldered on. Keyboard board Part #CZ1D30E51001CC Mouse board, left-hand weight, front LED board.
    • The keyboard dock board. Looks like there is a way to add a second HDD/SSD here but the connector is not soldered on.

    • Keyboard board Part #CZ1D30E51001CC

    • Mouse board, left-hand weight, front LED board.

    • Re-assembly in reverse order.

Sasa Macura

Miembro Desde 05/08/14

156 Reputación

2 Guías creadas

lindas fotos pero no hay un video que muestre como demontar la tapa.

ximena - Contestar

muy ilustrativas las imagenes.. tendras algunas donde se vea el mecanismo del teclado donde sujeta a la pantalla ?

carlos - Contestar

i need keyboard for this lap how i can get it

Hussien Mahmoud - Contestar

Añadir comentario

Ver Estadísticas:

Past 24 Hours: 3

Past 7 Days: 9

Past 30 Days: 17

Global: 6,741