Saltar al contenido principal

Herramientas Destacadas en este Teardown

Introducción

This is a basic teardown of the venerable TI-82 calculator.

Este desmontaje no es una guía de reparación. Para reparar tu Texas Instruments TI-82, utiliza nuestros manuales de servicio .

  1. Texas Instruments TI-82 Teardown, Texas Instruments TI-82 Teardown: paso 1, imagen 1 de 1
    • The calculator comes with a matching protective shield which slides down over the front; when the calculator is in use, you can slide it over the back. This is a nice touch, as it makes the cover much more difficult to lose.

  2. Texas Instruments TI-82 Teardown: paso 2, imagen 1 de 3 Texas Instruments TI-82 Teardown: paso 2, imagen 2 de 3 Texas Instruments TI-82 Teardown: paso 2, imagen 3 de 3
    • Flip the device over to access the battery cover.

    • Using a spudger, pry the release tab down and then pull the battery door up and off the calculator.

    • Remove:

    • 2 7.2mm Phillips #0 screws

    • 1 15.3mm Phillips #0 screw, and a battery retaining clip.

    • The CR1616 coin cell battery preserves settings and programs in memory while the main batteries are being changed.

  3. Texas Instruments TI-82 Teardown: paso 3, imagen 1 de 1
    • Insert a spudger into the seam between the two halves of the case, and pry it apart.

    • Watch out for corrosion in older calculators around the battery terminals -- this is why you should never leave batteries in electronics for extended periods of time.

  4. Texas Instruments TI-82 Teardown: paso 4, imagen 1 de 1
    • Opening the two halves of the calculator reveals a foil shield over the rest of the electronics.

    • Remove four Phillips screws to access the electronics underneath, then pull the shield away.

  5. Texas Instruments TI-82 Teardown: paso 5, imagen 1 de 1
    • ... And, here's the guts of the thing.

    • SRM20255LLM10 / F4ZM1938 (32Kbyte SRAM)

    • LH531GP4 (Mask ROM)

    • T 84C00AM-8 (Z80 CPU)

    • Toshiba / TC14L010AF / 1273 9506EAI (ASIC)

  6. Texas Instruments TI-82 Teardown: paso 6, imagen 1 de 2 Texas Instruments TI-82 Teardown: paso 6, imagen 2 de 2
    • Remove the remaining Phillips screws.

    • The screen and main board will lift out, leaving the membrane keypad in the front case.

bushing

Miembro Desde 23/04/10

9,955 Reputación

13 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 23

Ultimos 30 días: 78

Todo El Tiempo: 18,397