Herramientas Destacadas en este Teardown

Introducción

This guide explains how to take apart the standard Tesco Value Kettle, so you can see its internal parts.

Este desmontaje no es una guía de reparación. Para reparar tu Tesco Value JK07 Kettle, utiliza nuestros manuales de servicio .

  1. Take your kettle and remove it from the base.
    • Take your kettle and remove it from the base.

    • Carefully remove the limescale filter by sliding it out from the lip.

    Agregar Comentario

  2. Remove the screw from the bottom side of the lid.
    • Remove the screw from the bottom side of the lid.

    • Disassemble the lid and remove the plastic piece inside.

    Agregar Comentario

    • Remove the button that opens the lid by sliding it out.

    Agregar Comentario

    • Remove the screws on the underside of the kettle to release the socket cover.

    • Separate the handle from the kettle.

    Agregar Comentario

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Remove the screws to separate the handle and the lid from the hinge.

    Agregar Comentario

    • Gently remove the switch cover.

    • Remove the circular piece attached to the switch base by gently pulling it away.

    Agregar Comentario

    • Remove the screws from the socket at the back of the kettle.

    • These screws also hold the socket together, so once they have been removed, it can be opened.

    • The components within the socket are clipped in. Remove the components by gently pulling.

    Agregar Comentario

    • Remove the heating element.

    • Remove the gasket.

    • Remove the plate beneath the heating element by bending the metal in the holes as shown in the picture. Remove the plate from the clips.

    Agregar Comentario

    • Remove all the screws from the bottom, then gently separate the two halves.

    Agregar Comentario

    • Then push the feet (B) out from the base (C).

    Agregar Comentario

    • The plug and cable (G) are held in by clips and can be pulled away.

    • The fuse (F) can be pulled away from inside the pins on the plug (G).

    Agregar Comentario

    • The kettle is now fully disassembled.

    • There should be 26 separate parts, all shown here in this photo.

    Agregar Comentario

emily king

Miembro Desde 17/03/10

21 Reputación

1 Guía escrita

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 3

Últimos 30 Días: 21

Todo El Tiempo: 6,374