Saltar al contenido principal

Herramientas Destacadas en este Teardown

Introducción

Hey im Marios!I Make repairs on everythink you may have in your house!This is an easy repair but some people may want some help!Lets go!

Este desmontaje no es una guía de reparación. Para reparar tu TP-LINK Wireless 2-Way Audio Surveillance Camera, utiliza nuestros manuales de servicio .

  1. Remove the 2 screws holding the back cover!Should be fairly easy(You need a Phillips Screwdriver)
    • Remove the 2 screws holding the back cover!Should be fairly easy(You need a Phillips Screwdriver)

  2. This is also fairly easy to do!You can use your hands to pull it off!Put first use a flat screwdriver to open the "clips"
    • This is also fairly easy to do!You can use your hands to pull it off!Put first use a flat screwdriver to open the "clips"

  3. Remove the board from the Surveillance Camera!
    • Remove the board from the Surveillance Camera!

  4. Remove the wireless card which is hold by 2 "clips"!
    • Remove the wireless card which is hold by 2 "clips"!

  5. Remove the cable antenna now!And thats it you are done,now just follow the guide in reverse and install your new wireless card/antenna if also needed!
    • Remove the cable antenna now!And thats it you are done,now just follow the guide in reverse and install your new wireless card/antenna if also needed!

    • WARNING:DO THIS CAREFULLY!ITS SUGGESTED THAT YOU DO THIS STEP SLOWLY!TAKE YOUR TIME OR YOU MAY DAMAGE THE CABLE OR EVEN THE BOARD!

Marios

Miembro Desde 23/01/15

64 Reputación

1 Guía escrita

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 4

Todo El Tiempo: 1,279