Saltar al contenido principal

Qué necesitas

Este desmontaje no es una guía de reparación. Para reparar tu Sony MP-F75W, utiliza nuestros manuales de servicio .

  1. Sony MP-F75W Teardown, Prepare yourself: paso 1, imagen 1 de 1
    • Get your tools and a grounding mat and strap ready.

  2. Sony MP-F75W Teardown, Lowering the Disk Tray: paso 2, imagen 1 de 1
    • Push the trigger arm inwards to get the disk tray in the "injected mode".

    • Be careful not to pinch your fingers.

    • Tipp: If you're planning to store the drive long term, you might consider lowering the disk tray beforehand .

  3. Sony MP-F75W Teardown, Removing the Head Stop: paso 3, imagen 1 de 3 Sony MP-F75W Teardown, Removing the Head Stop: paso 3, imagen 2 de 3 Sony MP-F75W Teardown, Removing the Head Stop: paso 3, imagen 3 de 3
    • Gently lift the retaining clip.

    • Then move the head stop to the rear of the drive to remove it.

    • Make sure, the disk tray is lowered, before attempting this step!

    • Do not bend the head assembly!

  4. Sony MP-F75W Teardown, Removing the Eject Motor Assembly: paso 4, imagen 1 de 3 Sony MP-F75W Teardown, Removing the Eject Motor Assembly: paso 4, imagen 2 de 3 Sony MP-F75W Teardown, Removing the Eject Motor Assembly: paso 4, imagen 3 de 3
    • Unscrew the Eject Motor Assembly.

    • Gently unplug it's connector.

    • Lift the Motor Assembly up and remove it.

  5. Sony MP-F75W Teardown, Removing Slide Plate: paso 5, imagen 1 de 3 Sony MP-F75W Teardown, Removing Slide Plate: paso 5, imagen 2 de 3 Sony MP-F75W Teardown, Removing Slide Plate: paso 5, imagen 3 de 3
    • Remove the retaining washers (be careful not to loose them!)

    • Be careful not to loose these washers. They're pretty much unobtainium.

    • Lift the Slide Plate up and remove it entirely.

  6. Sony MP-F75W Teardown, Removing Stepper Motor Assembly: paso 6, imagen 1 de 2 Sony MP-F75W Teardown, Removing Stepper Motor Assembly: paso 6, imagen 2 de 2
    • Remove the two brass screws.

    • Gently unplug the Stepper Motor Assembly and remove it.

    • You should never ever unscrew the bolts for the head alignment, undless there's something wrong with it.

  7. Sony MP-F75W Teardown, Removing Head Assembly: paso 7, imagen 1 de 3 Sony MP-F75W Teardown, Removing Head Assembly: paso 7, imagen 2 de 3 Sony MP-F75W Teardown, Removing Head Assembly: paso 7, imagen 3 de 3
    • Gently unplug the Head Assembly.

    • Unscrew the black screws to remove the Slide-guide shaft.

    • Remove the Head Assembly with utmost care.

    • Do not open the head assembly too far. Doing so might damage ist completely.

  8. Sony MP-F75W Teardown, Removing the Lateral Brackets: paso 8, imagen 1 de 1
    • Unscrew and remove the Lateral Brackets.

  9. Sony MP-F75W Teardown, Removing the Eject Gear Switch Assembly (new design): paso 9, imagen 1 de 2 Sony MP-F75W Teardown, Removing the Eject Gear Switch Assembly (new design): paso 9, imagen 2 de 2
    • Unscrew …

    • … and remove the Switch PCB.

  10. Sony MP-F75W Teardown, Removing the Eject Gear Switch Assembly (old design): paso 10, imagen 1 de 1
    • Desolder …

    • … unclip …

    • … remove PCB carefully, not to break the delicate switch.

  11. Sony MP-F75W Teardown, Removing the Eject Motor: paso 11, imagen 1 de 2 Sony MP-F75W Teardown, Removing the Eject Motor: paso 11, imagen 2 de 2
    • Carefully unclip the (desoldered) motor.

    • Pay attention to the cable routing!

  12. Sony MP-F75W Teardown, Opening the Eject Gear Box: paso 12, imagen 1 de 3 Sony MP-F75W Teardown, Opening the Eject Gear Box: paso 12, imagen 2 de 3 Sony MP-F75W Teardown, Opening the Eject Gear Box: paso 12, imagen 3 de 3
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar
    • Open the eject motor.

    • If your motor is of the old design and held together using clips, bend one clip using tweezers or a long flat blade scredriver.

    • Handle all clips with utmost care! You will break them if you push too hard.

  13. Sony MP-F75W Teardown, Disassembling the Eject Gear Box: paso 13, imagen 1 de 2 Sony MP-F75W Teardown, Disassembling the Eject Gear Box: paso 13, imagen 2 de 2
    • Remove the big eject wheel by pinching the clip and pushing through the connecting rod.

    • Remove the other gears.

    • Be especially careful when opening clips.

    • The small yellow gear is the infamous "cheese gear." It will deteriorate and crumble eventually, thus resulting in a no longer working eject mechanism.

    • You have sucessfully disassembled the complete drive.

Alexander Krause

Miembro Desde 07/13/22

229 Reputación

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 21

Todo El Tiempo: 727