Repara tus cosas Comunidad Tienda

Sony DPTA-RS1 Active Stylus Teardown & Battery Replacement

Introducción

Tearing down my DPTA-RS1 stylus and replacing the dead li-ion battery without damaging the cosmetics.

Qué necesitas

  1. Sony DPTA-RS1 Active Stylus Teardown & Battery Replacement, Loosen the Tip: paso 1, imagen 1 de 2 Sony DPTA-RS1 Active Stylus Teardown & Battery Replacement, Loosen the Tip: paso 1, imagen 2 de 2

    • The tip is glued-in-place. You need to wiggle it with force to loosen the glue.

    • Do not use clamps or pliers to hold the tip. You may risk damaging the capacitive coil underneath.

    Editar

  2. Sony DPTA-RS1 Active Stylus Teardown & Battery Replacement, Remove the Buttons: paso 2, imagen 1 de 1

    • The internals are now held in place by the plastic buttons. Remove them to proceed

    • Use a prying tool to remove the buttons. The middle pivot is a good entry point.

    Editar

  4. Sony DPTA-RS1 Active Stylus Teardown & Battery Replacement: paso 3, imagen 1 de 1

    • With the buttons removed, you can now slide out the guts in the tip's direction. You can now perform a battery replacement.

    Editar

  5. Sony DPTA-RS1 Active Stylus Teardown & Battery Replacement, Take a look inside: paso 4, imagen 1 de 1

    • Apparently, the pen is built by Hanvon and is powered by ATMEL's (now Microchip's) maXStylus Technology.

    • ATMEL maXStylus mXTS220 Capacitive Stylus Driver

    • TI BQ24232RGTR Li-ion Battery Charger

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 1 otro colaborador

A. Lithia

Miembro Desde 03/23/23

149 Reputación

1 Guía escrita

Insignias: 4

+1 mas insignia

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 9

Ultimos 30 días: 102

Todo El Tiempo: 195