Herramientas Destacadas en este Teardown

Introducción

I'm going to dissect an old friend, my first disc player. It is hoped that this teardown, while exposing the hydro-suspension and green-amber lighting, will reveal an awesomeness worthy of a Sony PS3 Slim (Gadget Lab Contest).

Este desmontaje no es una guía de reparación. Para reparar tu Sony D-822K Car Discman, utiliza nuestros manuales de servicio .

Obtain a D822-K Discman and remote. True, it has DSP and Surround Sound, but the 90's have come and gone. It's okay to take it apart.
  • Obtain a D822-K Discman and remote. True, it has DSP and Surround Sound, but the 90's have come and gone. It's okay to take it apart.

My gosh until now I totally forgot about this player, I had the exact same one for years !

Below - Contestar

Wow - this was my first player, too. Expensive little thing... I forgot about the luminance until you mentioned it - I loved the green.

IanMaffett - Contestar

Cita de IanMaffett:

Wow - this was my first player, too. Expensive little thing... I forgot about the luminance until you mentioned it - I loved the green.

It was expensive, wasn't it? I was expecting a little more sophistication in the suspension for the price.

Randy - Contestar

Oh, last week I found that missing illumination switch. When I put in, I'll try to fix the whining sound from the headphone output.

Randy - Contestar

Position unit so that the bottom is facing up. Remove the 6 screws.
  • Position unit so that the bottom is facing up. Remove the 6 screws.

  • Hold top and bottom of unit together as you turn the unit over, bottom facing down. Use caution; the upper and lower case, along with circuit board are now loose.

  • Watch out for the AVLS and illumination switches, they love to disappear when unsupervised. Remove top of case.

Agregar Comentario

  • Removing the CD reader: Gently pull all 3 rubber grommets sideways, away from the CD reader.

  • Slide edge of ribbon cable connector towards ribbon cable to disengage.

  • Unplug the red, white, and blue plugs from the circuit board.

Agregar Comentario

  • Observation: This is the Hydro Suspension system...really.

Agregar Comentario

  • Remove circuit board

  • Notice the dual-color light modules. (I temporarily connected the power to show off the lights)

Agregar Comentario

  • Disconnect tailpiece, and power supply.

Agregar Comentario

  • Remote: Remove the 3 screws from the bottom. Pull apart.

  • The function buttons have a neat overlay design.

Agregar Comentario

  • Completely disassembled. The illumination button was lost for two weeks after reassembling... but who uses amber lights anymore?

Agregar Comentario

Randy

Miembro Desde 09/10/09

84 Reputación

1 Guía escrita

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 17

Todo El Tiempo: 16,477