Saltar al contenido principal

Qué necesitas

Este desmontaje no es una guía de reparación. Para reparar tu Sidekick II, utiliza nuestros manuales de servicio .

  1. Sidekick II Teardown, Outer Casing: paso 1, imagen 1 de 1
    • Use the plastic opening tool to remove the 4 buttons on each corner of the Sidekick.

    • Gently pry open button and remove button.

    • Do this for each of the 3 buttons remaining.

  2. Sidekick II Teardown: paso 2, imagen 1 de 2 Sidekick II Teardown: paso 2, imagen 2 de 2
    • The bumpers on the top and bottom of the phone can be removed by simply "peeling" them off.

  3. Sidekick II Teardown: paso 3, imagen 1 de 1
    • Use the T6 Torx Screwdriver to remove the 4 screws that are underneath the 4 buttons you removed in step one.

  4. Sidekick II Teardown: paso 4, imagen 1 de 1
    • Flip the screen up halfway (90 degrees), to reveal the 2 screws above the right side of the keyboard.

    • Use the Torx 6 screwdriver to remove these 2 screws.

    • Be careful in handling the phone after removing the screws, because the two main bodies of the phone are no longer attached.

  5. Sidekick II Teardown: paso 5, imagen 1 de 1
    • After removing the 6 screws and both bumpers, the phone will be easy to separate into the two main bodies.

    • You can use your hands to simply pull apart the top casing from the bottom casing.

  6. Sidekick II Teardown, Sidekick II Teardown: paso 6, imagen 1 de 2 Sidekick II Teardown, Sidekick II Teardown: paso 6, imagen 2 de 2
    • Remove screen from casing.

  7. Sidekick II Teardown: paso 7, imagen 1 de 2 Sidekick II Teardown: paso 7, imagen 2 de 2
    • Remove 4 screws from back of screen using Torx 6 Screwdriver.

    • Pry screen out of casing using fingers.

  8. Sidekick II Teardown: paso 8, imagen 1 de 3 Sidekick II Teardown: paso 8, imagen 2 de 3 Sidekick II Teardown: paso 8, imagen 3 de 3
    • Remove 4 screws from front of screen with Phillip screwdrivers.

    • Peel off the metal covering on the back of the screen.

    • Be careful when taking off the metal covering. The orange ribbon will not come out all the way, and it is fragile.

  9. Sidekick II Teardown: paso 9, imagen 1 de 1
    • Remove the protective cover in front of the screen.

    • Do not use metal tools, you may damage the protective cover or the screen. Use your fingers only.

  10. Sidekick II Teardown: paso 10, imagen 1 de 2 Sidekick II Teardown: paso 10, imagen 2 de 2
    • Take the screws out using the Torx 6 screwdriver.

    • Then lift the thumb wheel and housing off of the front panel.

  11. Sidekick II Teardown: paso 11, imagen 1 de 2 Sidekick II Teardown: paso 11, imagen 2 de 2
    • Remove 2 black "rivets" from back of casing with the plastic opening tool.

    • Press keyboard out of front of casing using thumbs. Don't press too hard as you may break the board.

  12. Sidekick II Teardown: paso 12, imagen 1 de 2 Sidekick II Teardown: paso 12, imagen 2 de 2
    • Remove the 5 black screws with a Phillips head screwdriver.

    • Lift the bottom of the control board from housing, and separate the two.

  13. Sidekick II Teardown: paso 13, imagen 1 de 1
    • Carefully remove battery and back plate.

    • Do not use metal tools, you may damage the control board. Use only your fingers.

  14. Sidekick II Teardown: paso 14, imagen 1 de 1
    • Here are all of the pieces that you have disassembled

michael albaum

Miembro Desde 01/20/10

87 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 3-19, Maness Winter 2010 Miembro de Cal Poly, Team 3-19, Maness Winter 2010

CPSU-MANESS-W10S3G19

4 Miembros

11 Guías creadas

Un comentario

nice job from a former geek

Jared Boies - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 13

Todo El Tiempo: 7,227