Introducción

First attempt at a tear down of Seagates 3TB External Drive.

Este desmontaje no es una guía de reparación. Para reparar tu External Storage, utiliza nuestros manuales de servicio .

  1. Start at the plain end (the opposite side from the power jack) with the spudger. Carefully pry slightly up and away.
    • Start at the plain end (the opposite side from the power jack) with the spudger. Carefully pry slightly up and away.

    • Once you have the end opened up, use the credit card to hold it open.

    • When you have the entire end separated, carefully pry the sides out and away along the adjoining two sides, working your way towards the end with the power jack. Save that end for last, it should lift away when you're done with the other sides.

  2. Work around the drive, ends first then the sides to open it This is really challenging and I did end up breaking some of the clips. Its pretty hard to tear apart. This is really challenging and I did end up breaking some of the clips. Its pretty hard to tear apart.
    • Work around the drive, ends first then the sides to open it

    • This is really challenging and I did end up breaking some of the clips. Its pretty hard to tear apart.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Gently pull the sides slightly and the drive will lift out
    • Gently pull the sides slightly and the drive will lift out

  5. Pull the rubber screw covers off, these are mounted with a little glue and came off easily Remove all four screws with the philips screwdriver Remove all four screws with the philips screwdriver
    • Pull the rubber screw covers off, these are mounted with a little glue and came off easily

    • Remove all four screws with the philips screwdriver

  6. Slide drive out of metal caddy (do not lift) You will now have a SATA Hard Drive and the caddy separate You will now have a SATA Hard Drive and the caddy separate
    • Slide drive out of metal caddy (do not lift)

    • You will now have a SATA Hard Drive and the caddy separate

  7. From the bottom of the caddy there are two black screws With the Philips screwdriver you can remove these Pull the circuit board gently and evenly to remove it
    • From the bottom of the caddy there are two black screws

    • With the Philips screwdriver you can remove these

    • Pull the circuit board gently and evenly to remove it

Edd

Miembro Desde 08/04/13

503 Reputación

2 Guías creadas

if i add a different adapter that doesnt require power, will the drive still work?

sulz - Contestar

Does anyone know what to do if the Data port does not work ?

remus lungeanu - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 14

Últimos 7 Días: 94

Últimos 30 Días: 431

Todo El Tiempo: 44,722