Introducción

First attempt at a tear down of Seagates 3TB External Drive.

Este desmontaje no es una guía de reparación. Para reparar tu External Storage, utiliza nuestros manuales de servicio .

Start at the plain end (the opposite side from the power jack) with the spudger. Carefully pry slightly up and away.
  • Start at the plain end (the opposite side from the power jack) with the spudger. Carefully pry slightly up and away.

  • Once you have the end opened up, use the credit card to hold it open.

  • When you have the entire end separated, carefully pry the sides out and away along the adjoining two sides, working your way towards the end with the power jack. Save that end for last, it should lift away when you're done with the other sides.

Agregar Comentario

Work around the drive, ends first then the sides to open it This is really challenging and I did end up breaking some of the clips. Its pretty hard to tear apart. This is really challenging and I did end up breaking some of the clips. Its pretty hard to tear apart.
  • Work around the drive, ends first then the sides to open it

  • This is really challenging and I did end up breaking some of the clips. Its pretty hard to tear apart.

Agregar Comentario

Gently pull the sides slightly and the drive will lift out
  • Gently pull the sides slightly and the drive will lift out

Agregar Comentario

Pull the rubber screw covers off, these are mounted with a little glue and came off easily Remove all four screws with the philips screwdriver Remove all four screws with the philips screwdriver
  • Pull the rubber screw covers off, these are mounted with a little glue and came off easily

  • Remove all four screws with the philips screwdriver

Agregar Comentario

Slide drive out of metal caddy (do not lift) You will now have a SATA Hard Drive and the caddy separate You will now have a SATA Hard Drive and the caddy separate
  • Slide drive out of metal caddy (do not lift)

  • You will now have a SATA Hard Drive and the caddy separate

Agregar Comentario

From the bottom of the caddy there are two black screws With the Philips screwdriver you can remove these Pull the circuit board gently and evenly to remove it
  • From the bottom of the caddy there are two black screws

  • With the Philips screwdriver you can remove these

  • Pull the circuit board gently and evenly to remove it

Agregar Comentario

Edd

Miembro Desde 08/04/13

495 Reputación

2 Guías creadas

if i add a different adapter that doesnt require power, will the drive still work?

sulz - Contestar

Does anyone know what to do if the Data port does not work ?

remus lungeanu - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 26

Últimos 7 Días: 230

Últimos 30 Días: 1,058

Todo El Tiempo: 36,368