Introducción
A quick guide to tearing down, how to put back together, and what it looks like on the inside.
Qué necesitas
-
-
I used flat 2 out of the IFixIt kit I have. Slide it from USB down on both sides of device. Likely could be done better with other tools
-
-
-
-
I was mostly straight up and down with a slight angle to wiggle the USB port down. Bottom of plastic housing to battery side. I placed the orange tip after. Then snap housing back on. Feel is different but may still work (I tore down 2 that are unknown cause of failures). Make sure orange part is in before placing housing back on
-
