Herramientas Destacadas en este Teardown

Introducción

We disassembled this calculator on April 17, 2010.

Este desmontaje no es una guía de reparación. Para reparar tu Sanyo CX 110, utiliza nuestros manuales de servicio .

  • Here is the Sanyo CX 110 calculator.

Agregar Comentario

Now that we removed the back of the calculator, here is the battery and the back of the logic board.
  • Now that we removed the back of the calculator, here is the battery and the back of the logic board.

    • Sanyo Tight-Seal Power-Up Sum-3 1.5V AA battery.

    • Positive contact for the battery.

    • Negative contact for the battery.

Agregar Comentario

  • Remove these 7 screws using a razor blade.

  • Be careful not to break the razor blade because it is fragile.

  • Turn the circuit board 180 degrees after removing screws.

Agregar Comentario

  • You will now see the circuit board and the buttons. Remove the buttons for the calculator.

Agregar Comentario

  • Now we're all done! Just take the LCD apart and you are done completely!

    • Sum-3 Sanyo Battery.

    • LCD Screen Parts (darkener, inverter, LCD screen.

    • Circuit Board for the calculator.

    • Buttons for the calculator (square root, memory, percent, operators, numbers, etc.)

    • Housing for the calculator.

okay teardown. My only advice is DON'T use the flash. I can barly see some of the pictures because of it. Use natural sun lighting or even a set of lamps spaced approaply. instead. Other than that, good attempt.

Nicholas Ouimet - Contestar

samhnri

Miembro Desde 07/04/10

417 Reputación

2 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 3

Todo El Tiempo: 4,838