Este desmontaje no es una guía de reparación. Para reparar tu Samsung SGH-X450, utiliza nuestros manuales de servicio .

Take out the battery and SIM Card.
  • Take out the battery and SIM Card.

Agregar Comentario

Remove these screws.
  • Remove these screws.

Agregar Comentario

If the screws are removed, you can take the case of with your fingers or a small flathead screwdriver
  • If the screws are removed, you can take the case of with your fingers or a small flathead screwdriver

Agregar Comentario

Now you see the PCB
  • Now you see the PCB

  • Agere TR09WQTEF2B Processor

  • Agere PSC2106 Power Management IC

  • Battery contacts and power supply connector

  • SIM Card Slot

  • Back-Up battery

  • Antenna connector

  • 2,5mm Headphone Jack

Agregar Comentario

LCD Dispaly cable, you can release this connector with a small flathead screwdriver
  • LCD Dispaly cable, you can release this connector with a small flathead screwdriver

  • Be careful here, You can break the flatcable!

Agregar Comentario

To take the LCD display out of the case, click the upper case open with a small flathead screwdriver or case opener. Under the two pads under the LCD Display are 2 screws. Be also careful here, go not to far with the screwdriver so you can not damage the LCD display.
  • To take the LCD display out of the case, click the upper case open with a small flathead screwdriver or case opener. Under the two pads under the LCD Display are 2 screws.

  • Be also careful here, go not to far with the screwdriver so you can not damage the LCD display.

Agregar Comentario

Now you see this.
  • Now you see this.

  • If you want to remove the LCD display, lift the PCB of the LCD display up with a small flathead screwdriver.

Agregar Comentario

Finished!
  • Finished!

Agregar Comentario

Bryan

Miembro Desde 27/10/12

690 Reputación

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 4

Últimos 30 Días: 9

Todo El Tiempo: 1,283