Introducción

A look inside the Samsung Jitterbug.

Este desmontaje no es una guía de reparación. Para reparar tu Samsung Jitterbug, utiliza nuestros manuales de servicio .

  1. First remove the battery and rubber feet from base and under phone number inside. Undo all six screws. Only the two under the battery will come out fully. Undo all six screws. Only the two under the battery will come out fully.
    • First remove the battery and rubber feet from base and under phone number inside.

    • Undo all six screws. Only the two under the battery will come out fully.

  2. Pop the six clips indicated in green and remove back. I removed the two on the sides first, but it was a huge pain to open the rest of the way. I suggest starting from the top four. Blue is the connector to the screen and speaker board in the top of the phone.
    • Pop the six clips indicated in green and remove back. I removed the two on the sides first, but it was a huge pain to open the rest of the way. I suggest starting from the top four.

    • Blue is the connector to the screen and speaker board in the top of the phone.

    • Purple is the chip and orange is charging port.

    • The opposite side of the board (not pictured) has the microphone on it, it's a small black round bump on the bottom.

  3. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Unhook screen connector and pop out board (just put a screwdriver under and pop). Peel off button pad. Peel off button pad.
    • Unhook screen connector and pop out board (just put a screwdriver under and pop).

    • Peel off button pad.

  5. Remove rubber front, then turn over. Pop all five clips. Start at the top near the hinge and work down. Pop all five clips. Start at the top near the hinge and work down.
    • Remove rubber front, then turn over.

    • Pop all five clips. Start at the top near the hinge and work down.

  6. Blue is main screen and mini screen board. Green is button and underneath is the main speaker. Purple is Pop out all pieces. Be careful not to break the cabling connecting the outer bits to the board. Pop out all pieces. Be careful not to break the cabling connecting the outer bits to the board.
    • Blue is main screen and mini screen board. Green is button and underneath is the main speaker. Purple is

    • Pop out all pieces. Be careful not to break the cabling connecting the outer bits to the board.

Kari Fox

Miembro Desde 24/06/13

125 Reputación

1 Guía escrita

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 3

Últimos 30 Días: 13

Todo El Tiempo: 1,734