Saltar al contenido principal

Qué necesitas

Este desmontaje no es una guía de reparación. Para reparar tu Samsung Intensity, utiliza nuestros manuales de servicio .

  1. Samsung Intensity Teardown, Samsung Intensity Teardown: paso 1, imagen 1 de 1
    • Remove the back cover and battery

  2. Samsung Intensity Teardown: paso 2, imagen 1 de 1
    • Remove the 8 screw that hold the back cover down.

    • Carefully pry back piece off

    • Start at the bottom and work toward the top.

  3. Samsung Intensity Teardown: paso 3, imagen 1 de 1
    • Use the ipod opening tool to disconnect the Connector

  4. Samsung Intensity Teardown: paso 4, imagen 1 de 2 Samsung Intensity Teardown: paso 4, imagen 2 de 2
    • Carefully remove the main board

    • Make sure to not tear the microphone cable, pry it from the phone carefully

  5. Samsung Intensity Teardown: paso 5, imagen 1 de 2 Samsung Intensity Teardown: paso 5, imagen 2 de 2
    • Remove the 6 screws

    • Pry to ribbon cable assembly loose from the slider

    • Its glued on the left and right side

  6. Samsung Intensity Teardown: paso 6, imagen 1 de 1
    • Remove the 4 screw the holds the slider to the phone assembly

    • one of the screws will be behind the hinge

    • Carefully pry slider assembly loose from display assembly

  7. Samsung Intensity Teardown: paso 7, imagen 1 de 3 Samsung Intensity Teardown: paso 7, imagen 2 de 3 Samsung Intensity Teardown: paso 7, imagen 3 de 3
    • Remove the tape and pop the connectors and pull all the ribbon cables loose

    • Carefully pry the speaker loose from the case.

  8. Samsung Intensity Teardown: paso 8, imagen 1 de 1
    • Carefully work the keyboard loose from the display assembly

    • There are a couple fragile clips that hold it in place

  9. Samsung Intensity Teardown: paso 9, imagen 1 de 2 Samsung Intensity Teardown: paso 9, imagen 2 de 2
    • LCD comes out pretty easily

    • Pry it from the bottom and work up the sides to release it if stuck

    • The glass can be removed with a little heat from a heat gun or blow dryer

    • Pry it out from the outside edges working around carefully

David

Miembro Desde 08/10/11

148 Reputación

1 Guía escrita

Equipo

West Georgia Technology Miembro de West Georgia Technology

Business

1 Miembro

1 Guía escrita

Un comentario

This was so helpful! How can I show my gratitude to you for these helpful instructions?

teh_pwnerer22 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 12

Todo El Tiempo: 4,674