Introducción

Here is a relatively inexpensive and small guitar amp. This particular one needed some repair. So while I was waiting for parts, I figured I might as well make a teardown.

Este desmontaje no es una guía de reparación. Para reparar tu Rogue G10, utiliza nuestros manuales de servicio .

  1. Here is the front view of the Rogue G10 amp.
    • Here is the front view of the Rogue G10 amp.

    • Back side shows 4 Phillips head screws that need to be removed.

    • Here are the 4 #6x1" screws

    Agregar Comentario

  2. Use a small screwdriver or other small suitable prying instrument to remove the back cover.
    • Use a small screwdriver or other small suitable prying instrument to remove the back cover.

    • With the back cover removed the speaker and amp become visible.

    • Remove the 2 Phillips head screws from the carrying handle. These two screws also attach the amp to the onside of the case.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • Here are the two screws from the handle. They are 1/8"x1 1/4"

    • Remove the 16 screws from the plastic corners. These corners serve no purpose other than decoration.

    • There are 4 rubber feet on the bottom of the amp.

    Agregar Comentario

    • This shows the corners with the screws removed.

    • Remove the rubber feet by removing the Phillips head screws.

    • On the left and right side of the amp is a Phillips head screw, located 1/3 down from the top and to the front. These two screws hold the front panel to which the speaker is attached. Remove those.

    Agregar Comentario

    • Here is the one on the right side, same location.

    • Remove it as well

    • With those two screws removed, the front panel which houses the speaker, can be simply removed

    Agregar Comentario

    • remove the front panel and place aside.

    • With the front panel removed, the amp will now simply lift out as well

    • Here is the amp totally disassembled. Straight forward job. No glue, no hidden screws.

    Agregar Comentario

oldturkey03

Miembro Desde 29/09/10

548,759 Reputación

101 Guías creadas

Equipo

OTS Miembro de OTS

Business

1 Miembro

122 Guías creadas

great thank you

Jazmin Backer - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 17

Todo El Tiempo: 1,833