Herramientas Destacadas en este Teardown

Introducción

This is a teardown of the RIM Blackberry.

Este desmontaje no es una guía de reparación. Para reparar tu BlackBerry 7290, utiliza nuestros manuales de servicio .

With your index finger, press down on the lock button to unlock the battery cover.
  • With your index finger, press down on the lock button to unlock the battery cover.

  • Slide the battery cover down towards you to reveal the battery.

Agregar Comentario

Use your index finger to lift and remove the battery from the phone.
  • Use your index finger to lift and remove the battery from the phone.

Agregar Comentario

  • Slide the SIM card holder to the left to unlock the SIM card.

Agregar Comentario

  • Lift the SIM card holder up.

  • Gently remove the SIM card from the SIM card holder.

Agregar Comentario

  • Remove the four top screws using a T-6 torx screwdriver.

  • The top four screws are .413 inches.

Agregar Comentario

  • Remove the two bottom screws using a T-6 torx screwdriver.

  • The bottom two screws are .2 inches in length.

  • The second picture displays the device after the six screws have been removed.

Agregar Comentario

  • Use the plastic opening tool to apply pressure on the two clips that are located at the bottom of the phone.

Agregar Comentario

  • With both of the bottom clips unhooked, lift the bottom portion of the phone and slide it upwards (towards your fingers) to detach the back cover from the front cover.

Agregar Comentario

  • Using a T-6 screwdriver, remove the screw located on top of the phone.

  • After the screw has been removed, carefully lift the side button brace to reveal the side button.

Agregar Comentario

  • To remove the logic board mounting plate, start by loosening one side of the phone.

Agregar Comentario

  • With one side loosened, simply lift the logic board mounting plate off of the phone's front cover.

Agregar Comentario

  • Turn the logic board mounting plate over to reveal the LCD display.

Agregar Comentario

  • Peel off the rubber keypad buttons from the face plate.

Agregar Comentario

  • Use a plastic opening tool to unhook the LCD display from the logic board mounting plate.

Agregar Comentario

  • With the clip unhooked, gently pull off the LCD display from the phone.

Agregar Comentario

  • Remove the the three screws that are highlighted in red using a T6 torx screwdriver.

  • The screw is .2 inches in length.

Agregar Comentario

  • Remove the screw using a T6 torx screwdriver

  • The screw is .2 inches in length.

Agregar Comentario

  • Separate the logic board mounting plate from the logic board.

Agregar Comentario

  • These are all the components of the phone.

Agregar Comentario

kenny34

Miembro Desde 28/10/09

69 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 19-6, Maness Fall 2009 Miembro de Cal Poly, Team 19-6, Maness Fall 2009

CPSU-MANESS-F09S19G6

5 Miembros

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 7

Todo El Tiempo: 5,907