Teardown
Este desmontaje no es una guía de reparación. Para reparar tu NES Cartridge, utiliza nuestros manuales de servicio .
Flip the cartridge face-down on your table.
Use a 3.8 mm gamebit screwdriver to undo the 3 screws on the rear of the cartridge, and set them aside.
Gently lift up the half of the cartridge facing up, and set it aside.
Gently lift out the PCB, and clean the pins with isopropyl alcohol and a cotton swab. if the pins still remain dirty, carefully sand the pins with a very fine-grit sandpaper.
con 3 otros colaboradores
Miembro Desde 03/24/22
109 Reputación
1 Guía escrita
Insignias: 0
Elige el tamaño y copia el siguiente código para insertar esta guía como un pequeño widget en tu sitio web o foro.
Ultimas 24 horas: 3
Ultimos 7 días: 19
Ultimos 30 días: 75
Todo El Tiempo: 1,033