Introducción

PlayStation 3 super slim - how to fully disassemble.

You can see also: PlayStation 3 Super Slim Teardown


Please SUBSCRIBE to my channel ツ

Resumen del Video

  1. Remove the three rubber feet, warranty sticker and four screws.
    • Remove the three rubber feet, warranty sticker and four screws.

    • Gently pull up on the bottom cover to remove it.

    Agregar Comentario

  2. Slide the HDD cover toward the rear of the device to remove it.
    • Slide the HDD cover toward the rear of the device to remove it.

    • Remove the blue screw shown to remove the HDD caddy.

    Agregar Comentario

    • Use a metal spudger to push the tab on the rear top finisher, and lift up to remove it.

    Agregar Comentario

    • Repeat step 3 for the front top finisher.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • Remove the two screws indicated in the disk reader.

    • Remove the five screws shown around the edge of the top cover.

    • Lift the top cover up to remove it.

    Agregar Comentario

    • Move the optical disk reader assembly to the left to expose one of the screws holding the power supply in.

    • Remove the two screws indicated and carefully disconnect the cable on the right side of the power supply.

    • Lift the power supply up to remove it.

    Agregar Comentario

    • Carefully disconnect the ribbon cables indicated.

    • Lift the optical disk reader up to remove it.

    • Disconnect and remove the white cable and ribbon cable indicated.

    Agregar Comentario

    • Remove the seven screws indicated.

    • Lift the motherboard assembly up out of the lower half of the case to remove it.

    • Carefully disconnect the Wi-Fi antenna cables and fan connector indicated by red arrows.

    Agregar Comentario

    • Remove the six screws indicated to separate the heatsink and shield from the motherboard.

    good job you just broke the ps3 super slim

    korvanjundskyrim - Contestar

  4. Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

18 personas más completaron esta guía.

ZFix

Miembro Desde 09/12/13

160,257 Reputación

304 Guías creadas

Equipo

Master Techs Miembro de Master Techs

Community

279 Miembros

758 Guías creadas

What's the name of the screwdriver that undo's the star shaped screws?

themasterassassin8787 - Contestar

It is a T8 Torx screwdriver! I'll add the tools to this guide =)

Sam Lionheart -

i took apart my ps3 super slim and put it back together but there is no power what so ever no red light at all

pastorjon.m - Contestar

One thing to pay attention to: The T8 Torx screws (at least on my 500GB model) are Tamper Proof TR8 screws, meaning you need a special screwdriver to undo them. A normal T8 wont work.

Wesley V - Contestar

Step 4: “simply remove the front finisher” - are you kidding me? I nearly broke mine!

versluis2000 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 23

Últimos 7 Días: 146

Últimos 30 Días: 698

Todo El Tiempo: 30,115