Introducción

A general guide to takedown and disassemble the PlayStation 2 Slimline. This will give the user access to a number of internal components such as the motherboard, the optical drive, the cooling fan, and hard drive, among others.

Este desmontaje no es una guía de reparación. Para reparar tu PlayStation 2 Slimline, utiliza nuestros manuales de servicio .

On a flat working surface, flip the PlayStation 2 Slimline so that the bottom side is facing up.
  • On a flat working surface, flip the PlayStation 2 Slimline so that the bottom side is facing up.

  • Remove the covers over the screws, circled in red on the second image.

  • Take a Phillip's #1 screwdriver and remove the five screws circled in red on the second image.

  • You will have to remove the "Do Not Void" seal in order to remove the last screw.

Agregar Comentario

Make sure you haven't forgotten the screw under the "Do Not Void" seal.
  • Make sure you haven't forgotten the screw under the "Do Not Void" seal.

  • Take a metal spudger and separate the upper half of the chasis from the lower half.

  • For later models the DVD drive assembly is not screwed in and will fall off if you open it upside down.

Agregar Comentario

  • With the chassis open you can see the motherboard and its attachments.

  • Identify the battery, then use a spudger to pry it out. Disconnect the battery from the motherboard with your hands.

Agregar Comentario

  • Three cables connect the optical drive to the motherboard.

  • Pull the flex cable out of its socket.

  • Take a Phillip's #1 screwdriver and remove the four screws on the optical drive.

  • Pull up the optical drive and carefully peel the flex cable, attached underneath the drive, from the metal plate.

Agregar Comentario

  • The fan is secured with three PH00 screws.

  • Remove the three PH00 screws from the fan's cover.

  • Then peel the duct tape back and remove the cable.

Agregar Comentario

  • Remove the four screws marked on the picture. These are located on the bottom side of the motherboard.

  • Then flip the motherboard back over and remove the two rating screws on the upside.

  • Now both metal plates should be ready to remove.

Agregar Comentario

  • Remove the metal plate from the bottom side of the motherboard.

  • Now everything should be disconnected and you successfully torn your PlayStation 2 Slimline down.

  • To reassemble, follow these steps in reverse.

Very nice instructions.

Jordan Britt - Contestar

my 70004 it's egual than this

ISTRUCTIONS very usefull

federico4008 - Contestar

tlroesner

Miembro Desde 13/05/12

1,715 Reputación

4 Guías creadas

not all slimlines are internally the same. as seen in the second picture, this teardown is for the 75004 model

Roman - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 13

Últimos 7 Días: 61

Últimos 30 Días: 333

Todo El Tiempo: 34,667