Numworks Graphing Calculator Teardown

Escrito Por: JamesPi (y otro participante)

Publicado: March 28, 2024

Comentarios: 0
Favoritos: 0
Vistas: 361

Numworks Graphing Calculator Teardown

Escrito Por: JamesPi (y otro participante)

Publicado: March 28, 2024

Comentarios: 0
Favoritos: 0
Vistas: 361

Teardown

Introducción

This is a simple guide to removing the back of the Numworks Graphing Calculator. This does not cover removing the board from the front or any instructions as to disconnecting connectors besides the battery connector.

Qué necesitas

Este desmontaje no es una guía de reparación. Para reparar tu Numworks Graphing Calculator, utiliza nuestros manuales de servicio .

Paso 1 Numworks Graphing Calculator Teardown

Numworks Graphing Calculator Teardown, Numworks Graphing Calculator Teardown: paso 1, imagen 1 de 1

Peel away the six rubber foots on the back of the calculator using your fingernails.

Editar

Paso 2

Using a Torx T6 (or TR6) screwdriver, remove all six screws.

Editar

Paso 3

Carefully peel the two case parts away from each other, taking turns on each side disconnecting one at a time for all eight clips. The third row from the bottom up is more secure than the others. DO NOT JERK CASE APART, THERE IS A BATTERY CONNECTOR TO REMOVE instead, slowly open the case 180 degrees with the back facing you.

Editar