Saltar al contenido principal

Introducción

I'm going to open my old Nokia phone to have a look.But I only have very limited English writing skills and I hope you'll understand what I'm talking about.

Este desmontaje no es una guía de reparación. Para reparar tu Nokia 6108, utiliza nuestros manuales de servicio .

  1. Hello,I'm going to open my phone for some fun.
    • Hello,I'm going to open my phone for some fun.

    • Be careful not to drop any screws or parts when you're opening your phone.This may render your phone not usuable.Open your phone at your own risk.

  2. Remove the following parts. Battery cover
    • Remove the following parts.

    • Battery cover

    • Battery

    • SIM card

    • Remove two trox screws marked in figure 2.

  3. Remove the front panel by pulling it or using an I don't have a opening tool.So I used a flathead screw driver instead.
    • Remove the front panel by pulling it or using an

    • I don't have a opening tool.So I used a flathead screw driver instead.

    • Be careful not the damage the number pad connector(highlighted in red).If you break it.You'll have to replace the entre front panel.

  4. Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora

    Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora
  5. Remove 5 trox screws that are holding the screen and the touch pad. Remove 5 trox screws that are holding the screen and the touch pad.
    • Remove 5 trox screws that are holding the screen and the touch pad.

  6. After removing the touch pad and the screen.You can remove the logic board from the case. The board seem don't want to leave its cozy home.
    • After removing the touch pad and the screen.You can remove the logic board from the case.

    • The board seem don't want to leave its cozy home.

  7. Let's start removing the parts under the logic board.
    • Let's start removing the parts under the logic board.

    • Parts need to be removed.

    • A motor

    • Charger connector

    • A speaker

  8. Removing the EMI shield.Pry around the edge of the shield to remove it.
    • Removing the EMI shield.Pry around the edge of the shield to remove it.

  9. Nothing under the EMI shield. I think we should stop here right now.There are pictures for all parts.
    • Nothing under the EMI shield.

    • I think we should stop here right now.There are pictures for all parts.

Honam1021

Miembro Desde 19/02/11

325 Reputación

1 Guía escrita

i have same phone but it's keypad button's are not working.... can u help me that

Rohit Yadav - Contestar

Agregar Comentario

Ver Estadísticas:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

Todo El Tiempo: 4,387