Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Este teardown está en en curso – Recarga periódicamente para ver los cambios más recientes!

Introducción

This guide will show you how to tear down a Nintendo DS Lite.

  1. Your first step would be to unscrew all all screws on the back and take the case off.  You take the case off by placing a spudger on the line edges , and then place it inward, forcing it to separate the two parts.
    • Your first step would be to unscrew all all screws on the back and take the case off. You take the case off by placing a spudger on the line edges , and then place it inward, forcing it to separate the two parts.

  2. You first remove  the gabbles by gently pulling them and do the same for the WI-FI board
    • You first remove the gabbles by gently pulling them and do the same for the WI-FI board

  3. You take the mother board off by flipping the  upside-down  and the screen should pop right off.
    • You take the mother board off by flipping the upside-down and the screen should pop right off.

  4. Unscrew and gently slide wires through frame
    • Unscrew and gently slide wires through frame

  5. The DS should look like this and to put the DS back together simply follow steps back wards.
    • The DS should look like this and to put the DS back together simply follow steps back wards.

Isabella Sandoval

Miembro Desde 06/11/16

182 Reputación

1 Guía escrita

Don’t like this guide. Only a few steps. Tear downs usually have 50+. Add more and in detail.

Bob - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 5

Todo El Tiempo: 1,538