Herramientas Destacadas en este Teardown

Introducción

Here is the disassembly for a Nikon Coolpix 3200 digital camera.

Este desmontaje no es una guía de reparación. Para reparar tu Nikon Coolpix 3200, utiliza nuestros manuales de servicio .

  1. Use a small Philips screwdriver to remove the screws from the base of the camera.
    • Use a small Philips screwdriver to remove the screws from the base of the camera.

    Agregar Comentario

  2. Use a small Philips screwdriver to remove the screws from the side of the camera where the computer lead is.
    • Use a small Philips screwdriver to remove the screws from the side of the camera where the computer lead is.

    Agregar Comentario

    • Use a small Philips screwdriver to remove the two screws from the side of the camera where the card reader is.

    Agregar Comentario

    • Pry apart the outer casing. A gray plastic threaded piece (used to attach camera to a tripod) will fall out.

    Agregar Comentario

    • Use a Phillips screwdriver to remove the two silver screws that connect the circuit board to the outer front casing.

    Agregar Comentario

    • Pry apart the front outer casing from the circuit board. The camera will now be in three pieces.

    Agregar Comentario

    • Pull the connecting strip on the circuit board which connects it to the back outer casing.

    Agregar Comentario

    • Use a Philips screwdriver to remove the two screws next to the computer port and the brass screw on the circuit board.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • Use a Phillips screwdriver to unscrew the three screws that connect the outer lens rim to the front casing.

    Agregar Comentario

    • Use a Philips screwdriver to remove the three screws that hold the flash cover to the outer front casing.

    Agregar Comentario

    • Open the lid of the battery compartment and use a Philips screwdriver to remove the two screws at the bottom.

    Agregar Comentario

    • Use a Phillips screwdriver to unscrew the two screws that connect the inside battery casing to the front of the outer casing.

    Agregar Comentario

    • Pull off the battery casing from the inside of the outer front casing. The circuit board, battery casing, and front outer casing will be attached by a connecting strip along with red and black wires.

    Agregar Comentario

    • Use scissors to cut the red and black wires away from the battery points of contact.

    Agregar Comentario

    • Pull the connecting strip away from the circuit board to separate it from the front casing.

    Agregar Comentario

    • Use a Philips screwdriver to unscrew the two screws that connect the photo button to the outer front casing.

    Agregar Comentario

    • Firmly press on the photo button and this component will pop out.

    Agregar Comentario

    • Use a scalpel to pry apart the metal inner part of the button from the plastic outer piece.

    Agregar Comentario

    • Use your fingernails to peel the outer rim from the front casing.

    Agregar Comentario

    • Pull the connecting strip out of the circuit board to separate it from the LCD screen.

    Agregar Comentario

    • Use your fingernails to pry apart the back metal piece of the screen (covered by a black plastic film) from the front section of the screen.

    Agregar Comentario

    • Pry apart the back black piece and front white piece of the screen. Inside the screen there are four sheets of plastic: one opaque, two mirrored, and one thicker plastic sheet which has a foil piece attached to it.

    Agregar Comentario

    • Use a hammer and chisel to separate the lens piece of the camera from the circuit board.

    Agregar Comentario

    • Use your fingernails to pry off the motor, motor cover, and flash piece from the lens piece of the camera.

    Agregar Comentario

Milly Whitehead

Miembro Desde 09/03/10

47 Reputación

1 Guía escrita

Oh, and then just do everything in reverse to put it back together again? That hammer and chisel bit bothers me a bit.

mrs_prolo - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 11

Todo El Tiempo: 5,007