Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Herramientas Destacadas en este Teardown

Resumen del Video

Este desmontaje no es una guía de reparación. Para reparar tu Motorola Moto G 2nd Generation, utiliza nuestros manuales de servicio .

  1. Remove back cover. It's easy, no adhesive and no screws. Remove back cover. It's easy, no adhesive and no screws.
    • Remove back cover. It's easy, no adhesive and no screws.

    Also remove the SIM and SDCard!

    Ben Low - Contestar

  2. Twist off all 14 screws together and remove the back frame easily. But the screws feature different lengths, you'd better remember their positions. Twist off all 14 screws together and remove the back frame easily. But the screws feature different lengths, you'd better remember their positions. Twist off all 14 screws together and remove the back frame easily. But the screws feature different lengths, you'd better remember their positions.
    • Twist off all 14 screws together and remove the back frame easily. But the screws feature different lengths, you'd better remember their positions.

    "You'd better remember their positions" Can't you make full guides on all your devices?

    Glaceau Clara - Contestar

    Hi there! This is a teardown, not a repair guide, check the full manual to see more complete guides, here for instance is a detailed screw removal step.

    Sam Goldheart -

    Just for completion as I made the same mistake today.

    The longer screws are at the top and the bottom (2x4 screws) and the shorter ones (2x3) at the left and right side of the case.

    Took me some time to find out which one goes to which position.

    Sebastian Schwägerl - Contestar

  3. Take away the volume button and power button. Take away the volume button and power button.
    • Take away the volume button and power button.

  4. Release SIM&SD card reader connector and battery connector. And get the vibrator motor free from adhesive. Release SIM&SD card reader connector and battery connector. And get the vibrator motor free from adhesive. Release SIM&SD card reader connector and battery connector. And get the vibrator motor free from adhesive.
    • Release SIM&SD card reader connector and battery connector. And get the vibrator motor free from adhesive.

    Can u explain little detailed about this step. Unable to release sim connector.

    Goutham Ram - Contestar

  5. Loosen the platinum foil under SIM & SD card reader from plate. And then drag the stickers out which fix the battery. Loosen the platinum foil under SIM & SD card reader from plate. And then drag the stickers out which fix the battery. Loosen the platinum foil under SIM & SD card reader from plate. And then drag the stickers out which fix the battery.
    • Loosen the platinum foil under SIM & SD card reader from plate. And then drag the stickers out which fix the battery.

  6. Kits para Nintendo Switch

    Una solución rápida para volver al juego

    Comprar kits de Switch

    Kits para Nintendo Switch

    Una solución rápida para volver al juego

    Comprar kits de Switch
  7. At that time, remove the battery with SIM & SD card reader assembly together.
    • At that time, remove the battery with SIM & SD card reader assembly together.

  8. Separate battery and SIM & SD card reader assembly. Separate battery and SIM & SD card reader assembly. Separate battery and SIM & SD card reader assembly.
    • Separate battery and SIM & SD card reader assembly.

  9. Release LCD screen connector from motherboard. Release LCD screen connector from motherboard. Release LCD screen connector from motherboard.
    • Release LCD screen connector from motherboard.

  10. Release sensor flex connector and front camera connector respectively. Release sensor flex connector and front camera connector respectively.
    • Release sensor flex connector and front camera connector respectively.

  11. Remove screws on the motherboard and the motherboard can be removed easily. Remove screws on the motherboard and the motherboard can be removed easily. Remove screws on the motherboard and the motherboard can be removed easily.
    • Remove screws on the motherboard and the motherboard can be removed easily.

  12. Remove rear camera. Remove rear camera. Remove rear camera.
    • Remove rear camera.

  13. Remove front camera and sensor cable. Remove front camera and sensor cable. Remove front camera and sensor cable.
    • Remove front camera and sensor cable.

  14. Remove earpiece and loudspeaker. Remove earpiece and loudspeaker.
    • Remove earpiece and loudspeaker.

  15. Done.
    • Done.

Sophia

Miembro Desde 25/03/14

42,791 Reputación

62 Guías creadas

Nice work!

REQUEST: Next time you do a cell phone would you also shoot a straight down on top shot. The 3/4 is nice but I want to look straight down !

TY

Top View - Contestar

P.S. Or just do a single TOP VIEW at the END like this one from Dillon ! Pretty Please!

T-Mobile Huawei Prism U8651T Teardown

Top View -

Can anyone please tell me where I can get the details of the Antenna used for the GSM connection in this phone? Like the drawing or schematic.

Please I really need this as this phone has poor cell reception.

Amol - Contestar

My Moto G just burned with 12 V from a cheap auto-recharger. But I lost very important data on the 8 GB memory. Is there a possible way to save the data?

mihaibanditu - Contestar

Where can I get more information about GPS module and its antenna?

Paulo Abner - Contestar

how to remove the external HDD? is there any way to recover data from it after detaching it from the device?

Atul Mohan - Contestar

Give mi a seting

Ashish Barvhan - Contestar

Mala motoG2 chi purn settings pahije

Ashish Barvhan - Contestar

Can not remove the LCD?

jm2k7 - Contestar

tanto el auricular y el altavoz son iguales si se invierte de posicion

Jorge Laura - Contestar

what is issue if the moto g2 phone is heating at corner of near selfie camera when put for charging..

Mak Fighter - Contestar

must be reply for my question…

Mak Fighter - Contestar

what’s that small ribbon (looks like a thumbs up) coming out in image on step 13. I recently replaced a screen on my motog 2g and found this ribbon lying below battery but didnt know what to do with it. It is not a connector for sure as there are no sockets to connect there. my phone is working fine without my doing anything with that connector. just curious what it is for.

pradeep - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 11

Ultimos 30 días: 66

Todo El Tiempo: 51,630