Herramientas Destacadas en este Teardown

Introducción

This Teardown can also be used as a disassembly or troubleshooting guide.

Este desmontaje no es una guía de reparación. Para reparar tu Motorola C350, utiliza nuestros manuales de servicio .

  1. Use your finger to press the button and free the device rear case.
    • Use your finger to press the button and free the device rear case.

    • You may have to force it a bit more to free its bottom if you open it for the first time.

    Agregar Comentario

  2. slide the black button to free the battery so you can grab it with your other hand.
    • slide the black button to free the battery so you can grab it with your other hand.

    Agregar Comentario

    • You will see one plastic clip on each side of the device. Use your thumbs to push them apart and being able to separate the front case from the device other components.

    Agregar Comentario

    • Use your thumb to gently peel the keyboard off the front case.

    • Be careful, the plastic on which the keyboard is stuck is pretty fragile.

    Agregar Comentario

    • Remove the 4 T6 Torx screws

    Agregar Comentario

    • Use a metal spudger to pell off the four metal clips and separate the motherboard and keyboard from the main plastic part.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • The last thing you need to doto access the Logic Board is to separate the Keyboard/Screen block just taking apart with your fingers.

    Agregar Comentario

    • Remove the four T6 Torx Screws

    Agregar Comentario

    • Use a metal spudger togently free the screen/ear speaker metal case.

    Agregar Comentario

    • Slowly peel the ear speaker off the case.

    • Be really careful about the small plastic pin which can be easily lost.

    Agregar Comentario

    • Remove the two small metal clips keeping the cables safe.

    Agregar Comentario

    • Use a plastic spudger to pell off the two cables on the back side of the screen.

    • There are two very small connectors. Take care of them and replace them if they incidentally fall.

    Agregar Comentario

    • Use a plastic spudger to release the disconnected screen.

    Agregar Comentario

    • Use a plastic spudger to unclip the mic.

    Agregar Comentario

    • The upper speaker is kept in place by a metal plate.

    • Use a metal spudger to free the 3 clips on the back side

    Agregar Comentario

    • Insert your metal spudger to remove the metal plate and free the upper speaker.

    Agregar Comentario

    • Here you can see all the parts composing the Motorola C350.

    Agregar Comentario

Vincent Monteil

Miembro Desde 06/07/13

6,197 Reputación

19 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 7

Todo El Tiempo: 1,521