Saltar al contenido principal

Herramientas Destacadas en este Teardown

Este desmontaje no es una guía de reparación. Para reparar tu Morphy Richards Iron, utiliza nuestros manuales de servicio .

  1. This is the iron we will take apart.
    • This is the iron we will take apart.

  2. First remove the rear or the iron using the flathead screwdriver.
    • First remove the rear or the iron using the flathead screwdriver.

  3. Next remove the cable bridge bracket.
    • Next remove the cable bridge bracket.

  4. Next remove the screws from the base. (see arrows for location)
    • Next remove the screws from the base. (see arrows for location)

  5. Next remove the screw the hold the top on.
    • Next remove the screw the hold the top on.

  6. To free the long cable remove from terminal block at rear.
    • To free the long cable remove from terminal block at rear.

  7. At the front of the iron pull out the buttons for the steam and water.
    • At the front of the iron pull out the buttons for the steam and water.

  8. Next unclip the button holder (red circle) by undoing the screws (black circle)
    • Next unclip the button holder (red circle) by undoing the screws (black circle)

  9. Kits de reparación de iPhone X

    ¿Garantía vencida? No te preocupes, tenemos la solución.

    Comprar Ahora

    Kits de reparación de iPhone X

    ¿Garantía vencida? No te preocupes, tenemos la solución.

    Comprar Ahora
  10. Next remove the bridge clip from the arrows position.
    • Next remove the bridge clip from the arrows position.

  11. Next remove the inner button (black circle)
    • Next remove the inner button (black circle)

    • Now remove the centre screw (red arrow)

  12. slide off the cable holder from the cable.
    • slide off the cable holder from the cable.

  13. Disassemble the plug
    • Disassemble the plug

    • First remove the casing.

    • Now remove the wires from the pins.

    • Next remove the pins.

  14. Remove front of the iron by undoing the screw  (arrow) by first taking off cover cap.
    • Remove front of the iron by undoing the screw (arrow) by first taking off cover cap.

  15. Next take out round selector, this is simply clipped so can be pulled out with pliers.
    • Next take out round selector, this is simply clipped so can be pulled out with pliers.

  16. Next remove the washer parts at the front of the iron.
    • Next remove the washer parts at the front of the iron.

    • Take the tubing off.

  17. Remove the seals for the water pump.
    • Remove the seals for the water pump.

    • Now take pumps out.

  18. Remove the screw (circled) this will lead to the separation of the base and the top.
    • Remove the screw (circled) this will lead to the separation of the base and the top.

  19. Remove the top of the iron to reveal the under parts.
    • Remove the top of the iron to reveal the under parts.

    • Now remove the rubber seals from the plate.

    • Take out the screws linking to the stainless steel base.

  20. Remove the terminal block from the wires.
    • Remove the terminal block from the wires.

    • Next take off the black section of the iron.

  21. Now remove the screws from the steel base.
    • Now remove the screws from the steel base.

  22. Next remove each individual part ( mostly wiring)
    • Next remove each individual part ( mostly wiring)

  23. All parts at the end of the process.
    • All parts at the end of the process.

RIchard fox

Miembro Desde 17/03/10

260 Reputación

1 Guía escrita

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 30

Últimos 30 Días: 222

Todo El Tiempo: 22,337