Este teardown está en en curso – Recarga periódicamente para ver los cambios más recientes!

Herramientas Destacadas en este Teardown

  1. Has an additional USB port for charging. Input: 9V 1500mA
    • Has an additional USB port for charging.

    • Input: 9V 1500mA

    • Output: 5V 1000mA

    • Frequency: 100-150kHz

    • USB output: 5V 1000mA

    • Size 145mm X 81mm X 10mm

  2. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  3. Top and bottom shells are separated by  10 plastic clips. To open, insert plastic opening tool or plastic knife and push inward and towards the top shell.
    • Top and bottom shells are separated by 10 plastic clips.

    • To open, insert plastic opening tool or plastic knife and push inward and towards the top shell.

    • Start from near the USB port and work your way around. The corners are pretty hard and the clips are pretty sturdy.

    • Viola! Its open!

    • Holes there are for ventilation for the coil

  4. More pictures. Coil is covered by a foam pad held down by a little glue. Coil is covered by a foam pad held down by a little glue.
    • More pictures.

    • Coil is covered by a foam pad held down by a little glue.

Sean

Miembro Desde 30/08/10

181 Reputación

1 Guía escrita

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 3

Últimos 30 Días: 4

Todo El Tiempo: 4,238