Herramientas Destacadas en este Teardown

Introducción

Will show the process of taking apart of computer mouse that uses a ball for the process of tracking motion.

Este desmontaje no es una guía de reparación. Para reparar tu Mouse, utiliza nuestros manuales de servicio .

  1. Rotate mouse over and locate Trackball cover Using index fingers and thumb, rotate counter-clockwise Using index fingers and thumb, rotate counter-clockwise
    • Rotate mouse over and locate Trackball cover

    • Using index fingers and thumb, rotate counter-clockwise

  2. After the Trackball cover has been rotated, pry the lid off using fingernails. Remove Trackball cover and place to the side. Angle mouse to eject Trackball from the casing.
    • After the Trackball cover has been rotated, pry the lid off using fingernails.

    • Remove Trackball cover and place to the side.

    • Angle mouse to eject Trackball from the casing.

  3. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Using a Phillips head screwdriver, locate screw hole and unscrew the screw inside. Lift the two cases apart and place screw to the side. Lift the two cases apart and place screw to the side.
    • Using a Phillips head screwdriver, locate screw hole and unscrew the screw inside.

    • Lift the two cases apart and place screw to the side.

  5. Remove the wire from the plastic casing near the top of the mouse. Lift up to remove the PCB which is attached to the mouse. Place case to the side.
    • Remove the wire from the plastic casing near the top of the mouse.

    • Lift up to remove the PCB which is attached to the mouse.

    • Place case to the side.

  6. Locate where the wire is connected to the PCB via the white connection. Pry the connections apart and place the cable to the side. Pry the connections apart and place the cable to the side.
    • Locate where the wire is connected to the PCB via the white connection.

    • Pry the connections apart and place the cable to the side.

Kevin Gingrich

Miembro Desde 06/10/11

172 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 20-28, Maness Fall 2011 Miembro de Cal Poly, Team 20-28, Maness Fall 2011

CPSU-MANESS-F11S20G28

4 Miembros

7 Guías creadas

Wow! Someone really worked hard on this guide. Kudos sir.

Tushar Varshney - Contestar

Yes sir I won't know everything about the machine

mubarak wad gab tagel - Contestar

Ver Estadísticas:

Ultimas 24 Horas: 3

Últimos 7 Días: 7

Últimos 30 Días: 23

Todo El Tiempo: 3,061