Saltar al contenido principal

Este teardown está en en curso – Recarga periódicamente para ver los cambios más recientes!

Herramientas Destacadas en este Teardown

Introducción

How to take apart the M6013 Capacitor Meter

  1. Remove the circled screw Remove battery case and batteries
    • Remove the circled screw

    • Remove battery case and batteries

  2. Remove circled screws Pull case apart Watch out for buttons, they will fall out easily.
    • Remove circled screws

    • Pull case apart

    • Watch out for buttons, they will fall out easily.

  3. Remove circled screws Be careful when removing the circuit board, the battery cable is still connected. Unsolder the square locations either on the circuit board or the case to fully remove the circuit board
    • Remove circled screws

    • Be careful when removing the circuit board, the battery cable is still connected.

    • Unsolder the square locations either on the circuit board or the case to fully remove the circuit board

  4. Location of microprocessor Location of microprocessor
    • Location of microprocessor

  5. Remove the cable connector Remove Display
    • Remove the cable connector

    • Remove Display

Ted Hsueh

Miembro Desde 20/09/12

170 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 16-56, Forte Fall 2012 Miembro de Cal Poly, Team 16-56, Forte Fall 2012

CPSU-FORTE-F12S16G56

5 Miembros

7 Guías creadas

Add some specs on start and foto of the unit ....

Mateusz Bonkowski - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 363