Saltar al contenido principal

Qué necesitas

Este desmontaje no es una guía de reparación. Para reparar tu Logitech V220 - Cordless Optical Mouse, utiliza nuestros manuales de servicio .

  1. Logitech V220 - Cordless Optical Mouse Teardown, Removing the USB Wireless Receiver: paso 1, imagen 1 de 3 Logitech V220 - Cordless Optical Mouse Teardown, Removing the USB Wireless Receiver: paso 1, imagen 2 de 3 Logitech V220 - Cordless Optical Mouse Teardown, Removing the USB Wireless Receiver: paso 1, imagen 3 de 3
    • Wash your hands before replacing the battery to prevent debris getting into the mouse and damaging its internal components.

    • Orient the mouse so you are viewing its base.

    • Using your fingers, gently remove the USB wireless receiver by sliding it towards you.

    • USB removal will result in the power switch to be in its ON position.

    • With your fingertip, engage the power switch to its OFF position to ensure the mouse is not powered.

  2. Logitech V220 - Cordless Optical Mouse Teardown, Removing the Mouse Pads: paso 2, imagen 1 de 3 Logitech V220 - Cordless Optical Mouse Teardown, Removing the Mouse Pads: paso 2, imagen 2 de 3 Logitech V220 - Cordless Optical Mouse Teardown, Removing the Mouse Pads: paso 2, imagen 3 de 3
    • Locate the four mouse pads.

    • Use the rectangular end of the metal spudger to get underneath each mouse pad, pry them up, and peel them off.

  3. Logitech V220 - Cordless Optical Mouse Teardown, Unscrewing the Mouse Housing Screws: paso 3, imagen 1 de 1
    • Locate the four #0 Phillips screws where the mouse pads previously were.

    • Unscrew the four #0 Phillips screws with the Phillips #0 screwdriver.

  4. Logitech V220 - Cordless Optical Mouse Teardown, Separating the Mouse Housing: paso 4, imagen 1 de 2 Logitech V220 - Cordless Optical Mouse Teardown, Separating the Mouse Housing: paso 4, imagen 2 de 2
    • Once the housing screws are fully removed, slowly (and carefully) separate the top and bottom halves of the housing.

    • Rapid separation of the housing halves may result in damaging the power cables (red and black wires) and molex (white plug).

  5. Logitech V220 - Cordless Optical Mouse Teardown, Detaching the Top Mouse Housing: paso 5, imagen 1 de 2 Logitech V220 - Cordless Optical Mouse Teardown, Detaching the Top Mouse Housing: paso 5, imagen 2 de 2
    • Gently set the mouse halves down on a flat surface.

    • Secure the base half with one hand.

    • With thumb and forefinger, grab the end of the molex and pull it away from you until the molex is unplugged.

  6. Logitech V220 - Cordless Optical Mouse Teardown, Removing the Scroll Wheel: paso 6, imagen 1 de 3 Logitech V220 - Cordless Optical Mouse Teardown, Removing the Scroll Wheel: paso 6, imagen 2 de 3 Logitech V220 - Cordless Optical Mouse Teardown, Removing the Scroll Wheel: paso 6, imagen 3 de 3
    • Locate the one, scroll wheel, #0 Phillips screw near the very front edge of the mouse.

    • Turn the mouse 90 degrees clockwise.

    • While supporting the rear of the mouse base, unscrew the #0 Phillips scroll wheel screw.

    • Once the scroll wheel screw is fully removed, manually extract the scroll wheel and spring assembly.

  7. Logitech V220 - Cordless Optical Mouse Teardown, Removing the Scroll Wheel Spring: paso 7, imagen 1 de 2 Logitech V220 - Cordless Optical Mouse Teardown, Removing the Scroll Wheel Spring: paso 7, imagen 2 de 2
    • Locate the scroll wheel spring.

    • Use the tweezers to gently remove the spring by slowly tugging the spring away from the scroll wheel assembly.

  8. Logitech V220 - Cordless Optical Mouse Teardown, Removing the Circuit Board: paso 8, imagen 1 de 3 Logitech V220 - Cordless Optical Mouse Teardown, Removing the Circuit Board: paso 8, imagen 2 de 3 Logitech V220 - Cordless Optical Mouse Teardown, Removing the Circuit Board: paso 8, imagen 3 de 3
    • Locate and remove the circuit board screw.

    • Grip the edges of the circuit board.

    • Manually remove the circuit board from the base of the mold housing.

  9. Logitech V220 - Cordless Optical Mouse Teardown, Removing the Mouse Buttons Screw: paso 9, imagen 1 de 1
    • Locate and remove the #0 Phillips screw in the middle of the mouse.

  10. Logitech V220 - Cordless Optical Mouse Teardown, Removing the Mouse Buttons: paso 10, imagen 1 de 3 Logitech V220 - Cordless Optical Mouse Teardown, Removing the Mouse Buttons: paso 10, imagen 2 de 3 Logitech V220 - Cordless Optical Mouse Teardown, Removing the Mouse Buttons: paso 10, imagen 3 de 3
    • Flip over the top half of the mouse housing so you are viewing underneath it.

    • Locate the mouse button hooks.

    • Rotate the housing 180 degrees clockwise.

    • Using the spudger, firmly push down on each mouse button until the mouse button is released from the hook.

    • Viewing the front of the mouse, the left and right mouse buttons should be detached from the housing.

  11. Logitech V220 - Cordless Optical Mouse Teardown: paso 11, imagen 1 de 1
    • Hold the housing so you are looking down the battery slot.

    • Place the flat end of the spudger between the mouse buttons and the housing.

    • Pry off the mouse buttons.

Tyler Price

Miembro Desde 04/07/14

1,038 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 6-2, Forte Spring 2014 Miembro de Cal Poly, Team 6-2, Forte Spring 2014

CPSU-FORTE-S14S6G2

5 Miembros

20 Guías creadas

Un comentario

Tyler - Very good work on this and your other work on this mouse. I appreciate your attention to detail. I wonder if you are the T. Price who used to go to MacDonalds in U/A in 1995? Thanks again so much for your professional work!

Rik Lesel - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 11

Ultimos 30 días: 60

Todo El Tiempo: 4,837