Saltar al contenido principal

Introducción

Outline what you are going to teach someone how to do.

Este desmontaje no es una guía de reparación. Para reparar tu Logitech Harmony Hub, utiliza nuestros manuales de servicio .

  1. Powercord with a micro USB connector European plug adapter American plug adapter
    • Powercord with a micro USB connector

    • European plug adapter

    • American plug adapter

    • Harmony Hub

    • Micro USB cable

    • IR mini blaster

  2. Since we didn't find any screws we expected them to be under the soft foot pads. We easily removed them with a utility knife Now we can see 4 screws and 2 openings  to the PCB.
    • Since we didn't find any screws we expected them to be under the soft foot pads.

    • We easily removed them with a utility knife

    • Now we can see 4 screws and 2 openings to the PCB.

    • I wondered what they could be but my guess is that they're used to test the PCB.

  3. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  4. The case opens up easily when using a utility knife around the sides This is a cover paper to make sure the status LED doesn't shine in the rest of the casing but just to the front This is a cover paper to make sure the status LED doesn't shine in the rest of the casing but just to the front
    • The case opens up easily when using a utility knife around the sides

    • This is a cover paper to make sure the status LED doesn't shine in the rest of the casing but just to the front

  5. Inside the top case we find a load to give the product a little more weight As you can see the top case is made a little thinner on the places where an IR led is present As you can see the top case is made a little thinner on the places where an IR led is present
    • Inside the top case we find a load to give the product a little more weight

    • As you can see the top case is made a little thinner on the places where an IR led is present

  6. PCB was manufactured by a Chinese company called FCF There are 6 IR leds spread over the PCB CC2544 SoC 2.4-GHz RF Transceiver and antenna
    • PCB was manufactured by a Chinese company called FCF

    • There are 6 IR leds spread over the PCB

    • CC2544 SoC 2.4-GHz RF Transceiver and antenna

    • CSR8811 bluetooth chip and antenna

    • WiFi antenna from the AR9331 on the other side of the pcb

    • MX25L12835F 128Mbits serial Flash memory

  7. EM6AB160TSE-5G  512 Mbits SDRAM AR9331 2.4 GHz 802.11b/g/n SoC for AP and Router Platforms Micro USB (data and power) - Can be used to extend this hub with a Harmony Home Hub Extender
    • EM6AB160TSE-5G 512 Mbits SDRAM

    • AR9331 2.4 GHz 802.11b/g/n SoC for AP and Router Platforms

    • Micro USB (data and power) - Can be used to extend this hub with a Harmony Home Hub Extender

    • Reset/Pair button

    • 2x IR mini blaster ports (2.5mm)

November Five

Miembro Desde 25/08/16

429 Reputación

4 Guías creadas

Thanks for doing this!

Haluska - Contestar

Thanks for sharing this! I think I see an antenna port on that board, too. Interesting …

Now I’m wondering if I should take my chances and try to fix the loose micro usb port or just live with it.

Haluska - Contestar

Extremely helpful, thank you. But I also want to know the location of IR input which is used to learning IR commands from original remotes.

Tochi Chiang - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 6

Últimos 7 Días: 16

Últimos 30 Días: 66

Todo El Tiempo: 4,323