Introducción
This guide will show the teardown of a Linksys WAG200G gateway.
Qué necesitas
-
-
Turn the router with the bottom facing upwards and locate the 4 feet.
-
Use your nails or the opening tool to pry away each foot to reveal a screw, and unscrew each one.
-
The front of the case can be disconnected from the backside now.
-
-
-
-
The antenna cable is soldered to the board. It can be unsoldered or just cut.
-
Use the pliers to make the underside of the antenna smaller so it can fit through the case hole, and at the same time, pull the antenna itself.
-
-
-
The board can now be removed from the case easily.
-
10/100 Base-T Dual Port Transformer: HN2064CG
-
CPU: TNETD7200ZDW
-
10/100 Ethernet Switch : 88E6060-RCJ1
-
