Herramientas Destacadas en este Teardown

Este desmontaje no es una guía de reparación. Para reparar tu Lexmark Z11, utiliza nuestros manuales de servicio .

Be sure to remove the power cord and all other connections to and from the device.
  • Be sure to remove the power cord and all other connections to and from the device.

  • Remove easily detachable parts.

Agregar Comentario

To remove the cover and housing use a screw driver to remove the highlighted screws.
  • To remove the cover and housing use a screw driver to remove the highlighted screws.

Agregar Comentario

  • Additionally, remove those two screws at the bottom of the device.

Agregar Comentario

  • Press the nib marked in green inside and slightly lift the housing from the back plate shown in the first image here.

  • The housing can be removed by lifting and rotating it around the catches on the lower front side of the device highlighted in purple. Finally, it is shifted slightly to the front out of those catches.

Agregar Comentario

  • With this inner part nearly everything is easily accessible. There are two stepper motors:

    • NMB PM42L-048-FEA8

      • 4 wires

    • Mitsumi H9601

      • 5 wires, can probably be resoldered to use 4 or 6 wires

  • There is also an electronics board as well as smaller useful parts like buttons, LEDs, light barriers.

    • Motorola XC901051FTA

    • Motorola 34063 (switching voltage regulator)

Agregar Comentario

  • The motors in detail.

Agregar Comentario

raumschaum

Miembro Desde 27/02/13

371 Reputación

4 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 4

Todo El Tiempo: 993