Repara tus cosas Comunidad Tienda

LaCie Minimus Teardown

Introducción

How-To remove the internal hard drive contained within the external enclosure.

Qué necesitas

  1. LaCie Minimus Teardown, Hard Drive: paso 1, imagen 1 de 1

    • LaCie Minimus (2 TB hard drive)

    Editar

  2. LaCie Minimus Teardown: paso 2, imagen 1 de 3 LaCie Minimus Teardown: paso 2, imagen 2 de 3 LaCie Minimus Teardown: paso 2, imagen 3 de 3

    • Turn the drive over, noting the black rubber strips. Carefully peel each strip off, to reveal a set of two phillips screws under each strip.

    Editar

  3. LaCie Minimus Teardown: paso 3, imagen 1 de 2 LaCie Minimus Teardown: paso 3, imagen 2 de 2

    • Remove the two sets of phillips screws and set them aside.

    Editar

  5. LaCie Minimus Teardown: paso 4, imagen 1 de 1

    • Carefully push on the front, black faceplate to slide the drive and housing out of the case.

    Editar

  6. LaCie Minimus Teardown: paso 5, imagen 1 de 2 LaCie Minimus Teardown: paso 5, imagen 2 de 2

    • Note the label: Warranty Void If Seal Broken. In this case, we want to retrieve the data and do not care about the warranty. Remove the label, to expose one of the four total screws on the side to remove the internal drive.

    Editar

  7. LaCie Minimus Teardown: paso 6, imagen 1 de 2 LaCie Minimus Teardown: paso 6, imagen 2 de 2

    • Carefully remove the four screws holding the drive in the caddy, making sure that the hard drive does not slip out or damage the SATA controller card towards the rear of the case.

    Editar

  8. LaCie Minimus Teardown: paso 7, imagen 1 de 2 LaCie Minimus Teardown: paso 7, imagen 2 de 2

    • The drive is now removed. Use an external hard drive reader, etc., such as the Cavalry in the second picture, to hopefully access your drive.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Autor

con 1 otro colaborador

Lance Wessel

Miembro Desde 08/31/10

530 Reputación

3 Guías creadas

Insignias: 6

+ 3 más insignias

6 comentarios

Thank you !

We will need it ....

Giuseppedegioia - Contestar

Drive inside say

5VDC / 12VDC - 0.5A 0.7A

But my replace say:

5VDC, 0,60A

12VDC, 0,45A

Is that OK or should I not change?

hlundstedt - Contestar

thank you this was great help.

I have a problem where the usb port is broken on the inside of the hard drive. do you know what that piece is called? i need to buy a new one, not even sure if its possible to buy.

thank you

Jovan Popovic - Contestar

its the first green rectangle shape that has the USB attatched to it which is broken.

sorry not really good with this stuff just trying to solve it

Jovan Popovic - Contestar

Thanks, very clear manual, helped me wel ! :)

Tomas Navratil - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 9

Ultimos 30 días: 46

Todo El Tiempo: 7,792