Introducción
This is a simple teardown of the LG G watch R.
Qué necesitas
-
-
First remove the watch band using a small flat screw driver to compress the spring loaded pin.
-
Remove the four T4 torx screws (Green).
-
Carefully pry the base off using a thin flat screw driver
-
-
-
-
Disconnect the four electrical connectors from the board
-
Orange - Battery connector
-
Blue - button and charging connector
-
Green - Backlight
-
Purple - O-LED Controller + Mic
-
Remove the three phillips screws securing the board down. Then lift the board off the base
-
-
-
The battery is below the board.
-
The battery can easily be pried out using a small flat head screwdriver.
-
-
-
Using a small pliers and a small flat screwdriver the battery housing comes out easily.
-
-
-
Pictures of the front and back of the 1.3" P-OLED.
-
The screen is glued in.
-
8 comentarios
Is there a wifi antenna inside the LG G watch R?
Yes, there is a WiFi antenna inside the LG G Watch R, however WiFi functionality was only recently added to the G Watch R in a more recent update via Android Wear.
Are there differences between the UK as US G Watch R?
