Saltar al contenido principal

Introducción

This guide will show you how to teardown the handle to access the power button and motherboard.

Este desmontaje no es una guía de reparación. Para reparar tu Hoover LiNX, utiliza nuestros manuales de servicio .

  1. Remove the single 15mm Phillips #1 screw from the handle.
    • Remove the single 15mm Phillips #1 screw from the handle.

  2. Remove the handle by pulling it up.
    • Remove the handle by pulling it up.

  3. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  4. Remove two 15mm Phillips #1 screws from the handle.
    • Remove two 15mm Phillips #1 screws from the handle.

  5. Use a plastic opening tool to carefully pry the black cover off of the handle. Use a plastic opening tool to carefully pry the black cover off of the handle.
    • Use a plastic opening tool to carefully pry the black cover off of the handle.

  6. Remove five 15mm Phillips #1 black screws from the handle. Remove five 15mm Phillips #1 black screws from the handle.
    • Remove five 15mm Phillips #1 black screws from the handle.

  7. Remove the silver plastic cover using the plastic opening tool. Remove the silver plastic cover using the plastic opening tool.
    • Remove the silver plastic cover using the plastic opening tool.

Mark Nelson

Miembro Desde 25/01/18

392 Reputación

2 Guías creadas

Equipo

USF Tampa, Team S7-G4, Passmore Spring 2018 Miembro de USF Tampa, Team S7-G4, Passmore Spring 2018

USFT-PASSMORE-S18S7G4

4 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 8

Últimos 30 Días: 21

Todo El Tiempo: 645