Saltar al contenido principal

Este teardown está en en curso – Recarga periódicamente para ver los cambios más recientes!

Herramientas Destacadas en este Teardown

  1. Remove holding pin on outer part of fan Pull apart front frame from back frame
    • Remove holding pin on outer part of fan

    • Pull apart front frame from back frame

  2. Remove screws connecting the motor housing to the downrod Detach housing from downrod Note: Oscillation Control will no longer function
    • Remove screws connecting the motor housing to the downrod

    • Detach housing from downrod

    • Note: Oscillation Control will no longer function

  3. Remove Oscillation Control pin Remove back screw Remove Motor Casing
    • Remove Oscillation Control pin

    • Remove back screw

    • Remove Motor Casing

  4. Remove the four screws connecting the stator to the rotor. The top two are displayed. Detach the stator from the rotor.
    • Remove the four screws connecting the stator to the rotor. The top two are displayed.

    • Detach the stator from the rotor.

    • Note: the fan will no longer operate.

Nicholas Steele

Miembro Desde 27/09/17

384 Reputación

1 Guía escrita

Equipo

Cal Poly, Team S9-G2, Banghart Fall 2017 Miembro de Cal Poly, Team S9-G2, Banghart Fall 2017

CPSU-BANGHART-F17S9G2

4 Miembros

9 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 96